- Joined
- Jun 9, 2003
- Location
- Toronto, Canada
well this concludes an extremely long story that involves me recieving a new 1900 pally from amd b/c i thought my 1900 pally was defective. the temps on my old 1900 pally ( the one i sent back) were way too high so i sent my cpu back and they sent me a new 1900 pally. I put the pally into my a7v333 and again the temps were high. I then thought that it might be my mobo. so i put my 1800 t-bred 9 which has always ran cool) into the a7v and it ran hot too. so i put my newly recived pally into the a7n-8x that my 1800t-bred was in and the temps were low, in the 40's. so clearly my a7v was to blame. I also notcied that my 12v line in my a7v-333 was crazy compared to the 12v in my 8x, it is about 12.12 in my 8x with either the pally or the t-bred and about 13.13 in my a7v333 with either the pally or the t-bred. any ideas why my 12v line is over 13 in my a7v, could this be the cause of the high temps i get in any cpu that is in my a7v????
ps both systems are using enermax power supplies.
ps both systems are using enermax power supplies.