a7n8x 2400+ ddr400 / multi 10 and 10,5 don't post?

T

thepunk

New Member

Joined

Jun 27, 2003

• Jun 27, 2003

• #1

stable settings:
9,5x205
11x200 @ 1,825 Vcore

10x200 and
10,5x200 = no post
???

how can it be? there seems to be a prob with these two multis.

my target is something like 10x2XX or 10,5 x2XX, depending
on what vcore is needed and what fsb can be reached.

but why tf doesn't it post with these multis?

 

L

lazerblue31

Registered

​

Joined

Dec 12, 2002

Location

Manchester

• Jun 27, 2003

• #2

I had same problem, change the cpu fsb jumper on the board.
Usually set to 266/333 by default, change it to 200fsb and it will boot. My v1004 board wouldnt post but does now.

 

OP

T

thepunk

New Member

Joined

Jun 27, 2003

• Jun 27, 2003

• Thread Starter
• #3

i'll try that this evening.
if this will really work, i owe you one.
was searching now for a week or so...

 

C

cbakey

Member

​

Joined

Apr 8, 2003

Location

Lancaster, PA

• Jun 27, 2003

• #4

What board rev # and Proccesser are you using?

 

OP

T

thepunk

New Member

Joined

Jun 27, 2003

• Jun 27, 2003

• Thread Starter
• #5

sniff..

nope.

the fsb-jumper didn't do the trick.

it's rev. 2.0, bios 1004.
tried all bioses from 1003-1005, uber and 'normal',
so that can't be the prob.
processor is amd 2400+ (axda 2400 dkv3c aiuhb 0311 tpew)

pleaaaaaaase help!!!

 

james.miller

Member

​

Joined

Jun 8, 2002

Location

Dunstable, uk

• Jun 27, 2003

• #6

do lower multi's work?

i'm prety sure that board will only allow =>13.5 or <=13.5 depending on the cpu's defult multi.

 

OP

T

thepunk

New Member

Joined

Jun 27, 2003

• Jun 27, 2003

• Thread Starter
• #7

nonono.
running stable at 11x190 in the moment.
ONLY the multis 10 and 10,5 do not work.

 

=[8c0re8]=

Member

​

Joined

Jul 8, 2002

Location

Where Da Big Budz Grow!

• Jul 5, 2003

• #8

i to am wondering about this cause i cant post @ 10 or 10.5.

right now im running @ 213x11.0.

input anyone?

 

Gage8

Member

​

Joined

May 9, 2003

Location

New York State

• Jul 8, 2003

• #9

i just got a rev2.0. I'll have to try it out when i get home.

 

=[8c0re8]=

Member

​

Joined

Jul 8, 2002

Location

Where Da Big Budz Grow!

• Jul 12, 2003

• #10

well it posts @ 10x and 10.5x when i switched the jumper on the MB, but i cant get past 200fsb in the options seems that it does not have the option to change it in the bios. only when i set the
jumper to 200 on the MB will i be able to get past 200fsb but it wont give me the 10x an 10.5x multi setting?..

input anyone?