FBRopz
02-21-01, 09:49 AM
Ok all, I am in further need of the assistance of those overclocking Gods out there. Here is the sit-rep:
I'm sitting pretty stable at 950 with my 750. I've overclocked only the multipliers to 9.5, left the FSB alone(seems this board gets unstable if you try to go over 106). In order to get from 900 to 950 I had to up the voltage from 1.65v to 1.75v( reads 1.78 ). I've been at 950 for several days now, very stable, I've locked up twice, but that was a software issue. I really want that Gig. This is what I've done so far, spent 4 hours on it last night:
Tried just moving to 10x, no post, try going to 9.5x@106, no post. Try upping the voltage to 1.80v @ 10x, no post, tried setting 1.80v @ 9.5x@106, still no post (at this point I go out and shoot a tree to relieve pressure;) keep in mind, everytime I tried something new and didn't post, I had to clear CMOS and reset the *(&)(^*^ thing back up. Anyway, i've tried almost everything...
Any help or advice anyone can offer would be great. stats are K7T Pro 2-A Mobo, Duron (green) 750Mhz, latest BIOS, FSB can go anywhere from 100 to 132. Temps are great, barely get to 38C with a full load. HELP!!!
Thanks. :)
I'm sitting pretty stable at 950 with my 750. I've overclocked only the multipliers to 9.5, left the FSB alone(seems this board gets unstable if you try to go over 106). In order to get from 900 to 950 I had to up the voltage from 1.65v to 1.75v( reads 1.78 ). I've been at 950 for several days now, very stable, I've locked up twice, but that was a software issue. I really want that Gig. This is what I've done so far, spent 4 hours on it last night:
Tried just moving to 10x, no post, try going to 9.5x@106, no post. Try upping the voltage to 1.80v @ 10x, no post, tried setting 1.80v @ 9.5x@106, still no post (at this point I go out and shoot a tree to relieve pressure;) keep in mind, everytime I tried something new and didn't post, I had to clear CMOS and reset the *(&)(^*^ thing back up. Anyway, i've tried almost everything...
Any help or advice anyone can offer would be great. stats are K7T Pro 2-A Mobo, Duron (green) 750Mhz, latest BIOS, FSB can go anywhere from 100 to 132. Temps are great, barely get to 38C with a full load. HELP!!!
Thanks. :)