MY System clock is locked at 100 mhz ? what would cause that... i know its not the cpu cause i just bought at barton 2500+ and it's still locked at 100mhz
are you sure it's locked? check to see if the CPU speed thing on top says xp2500 or if your in limp mode. you're prolly in limp mode in which case you need to set the CPU speed to manual and than try to fix the clocks.
Tried both of those... with no luck ... it posts as 100 fsb no matter what i change fsb to.
for example i set fsb to 166 and the multiplier to 10x
which should be 166x10
but when it posts it is 100x10, but in bios it still saves my selection of 166 for a fsb. whatever i change the fsb has no effect on the speed. it stays at 100 no matter what
As posted in your other thread on the same subject, make sure your bios matches your MB version. If you have version 2.0 then 1.7 is the latest and 2.0 and 1.9 are for version1.x.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.