PDA

View Full Version : duron 700 cant pass 7.5


nick adams
02-28-01, 01:10 AM
System=
A7V133 cpu @ 1.60 in bios
Duron700 @ 787
256mb pc133
ata100 wd 40gig 7200
16x acer dvd
16x10x40 yamaha cd-r/rw
32mb sdram prophet mx II nividia
250ps

3D MARK SCORE = 4434

now for the problem i Cant seem to get the multiplier above 7.5

current sytem settings yeilds
multiplier =7.5
cpu freq. = 105
dram freq. = 140

Any help????

Wega!
02-28-01, 01:40 AM
How did u unlock ur CPU?

nick adams
02-28-01, 02:27 AM
micro tip conductive pen and a needle

why?

Wega!
02-28-01, 06:32 AM
I just needed to know, if u had connected the L1 bridges good enough. Have u tried other settings like 8x or 8.5x?

dimmreaper
02-28-01, 09:53 AM
What kind of voltage are you plumbing to the CPU? Don't be afraid to take it to 1.85V as long as you have quality cooling. Keep it under 1.8V with OEM cooling (unless you crazy and don't give a f**k about you CPU).

Monza
02-28-01, 03:09 PM
if u have a a7v133, y r u not using the 133mhz bus. run ur cpu at say 5or5.5x133 for a start and go from there, dont screw 7.5 and the like. just set everything, but the vcore which i like jumpers, to jumperless and work in bios, go 4 133, and set the multi as far down as u can, and go. slap a vantec hs on that puppy she'll go

good luck bra
monza