Hi New User

[MiniChris]

Hi

I'm pretty, no sorry, very new to overclocking. I have a Athlon T.Bird 850 on a KT 7A motherboard and a Athlon classic 550 on a SD11 motherboard. so far I have altered the multiplier of the T.Bird to get it to 1000mhz and the 550 is not running.

My temp is at about 35 deg C. normally and 41 maximum. But any higher on the multiplier and I get crashes during windows or failure to boot up.

I have the Global win FOP 38 cooler and 2 YS Tech case fans. Also 512 mb of RAM.

Any comments or tips would very apprediated.

I'm really just saying hi to everybody.

Chris

[Hoot]

Hello Chris and welcome aboard.

You need to split off the two processors. Are you saying the T-bird works okay at 1000 and the Classic Athlon doesn't at 550 or that both don't work at their current settings? Cooling setup looks adequate.

Hoot

[MiracleMan]

Had u tried to pump up the voltage? And u are using thermal paste?

[fireball****aka fireball_87]

MiniChris (Mar 01, 2001 03:59 a.m.):
Hi

I'm pretty, no sorry, very new to overclocking. I have a Athlon T.Bird 850 on a KT 7A motherboard and a Athlon classic 550 on a SD11 motherboard. so far I have altered the multiplier of the T.Bird to get it to 1000mhz and the 550 is not running.

My temp is at about 35 deg C. normally and 41 maximum. But any higher on the multiplier and I get crashes during windows or failure to boot up.

I have the Global win FOP 38 cooler and 2 YS Tech case fans. Also 512 mb of RAM.

Any comments or tips would very apprediated.

I'm really just saying hi to everybody.

Chris

i used to have a sd11 and athlon550, the sd11 totaly SUCKED! i couldent even use softfsb to change the fsb. as for the athlon-tbird, just try pimping the volatge till it squieles:)