Pics of inside of case

[stan03]

Could some people post some pics of the inside of thier cases, so i can get some ideas on wire managment? thanks

[HeXenViRii]

http://24.96.21.70:5999/OCer%20Hosting/HeXenViRii/i1.JPG
my main comp was a mess =) it was tough to get everything in there , but my basic stratagy was to let the WC pipe run free , use zip-ties to make the power connectors into a type of main power feeding run and then use round ide cables in no apearent order for the rest ... I couldnt even get my hands in there to plug em in to the mobo :D The power wire for the pump and aux fan power wires are hid underone of those wire gaurds running up to the top of the case .

http://24.96.21.70:5999/OCer%20Hosting/HeXenViRii/i2.JPG
For the other one i use the zip-ties again ... i recommend using them to tameing cables , it always works well. You'll find then on the ethernet cables and the power connectors agian , that ribbon cable is also getting switched to a round one ... just remeber to try to route wires clear of fans ...

[stan03]

the pics no workie

[wannaoc]

This was before I did my final wire cleanup after installig my w/c. It's about as bad as I think wires should be for good airflow. I added molex plugs to the extra wires so I could remove them, they are the plugs sticking out of the PSU on the top.
http://home.cfl.rr.com/extremepcparts/images/wcprogress/sidefin.jpg

[D0ughB0y]

copy and past:

www.geocities.com/d0ughb0y23

[HeXenViRii]

Originally posted by stan03
the pics no workie

sorry , server was down ... thunderstorm :D

[scanido]

http://www3.sympatico.ca/scanido/images/side.jpg

[stan03]

scanido i don't see wires at all, what did you do with them?

[Mico]

Scandio, that is the cleanest case I have seen in a while...incredible.

[stan03]

i definitely agree, i wanna know what he did!!!:)

[WejRepus]

i am guessing they are all stuffed behind and around his rad and on the other side of his drive bays, pretty nice job too

[Kendan]

Here are two of mine. sorry for the size, they were already on my server.

My Gaming rig:

http://kennysheridan.com/images/Gameinside01.jpg



My duallie:

http://kennysheridan.com/images/Dual01.jpg

[Mico]

Are those 2 SK-7's on that dualie?

[stan03]

nope, check sig, they are slk 800s

[scanido]

Originally posted by WejRepus
i am guessing they are all stuffed behind and around his rad and on the other side of his drive bays, pretty nice job too

Good guess!

I squeezed the PSU cables behind the rad and made them come down on the other side of the drive bays. From there just connect the appropriate cables to drives. It seriously takes me a half a day to route all cables right. This includes soldering extensions and what not.

Just be creative, take yer time, and of course have fun!

[stan03]

wanna come to my house? lol JK