Vovan
03-03-01, 10:13 AM
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I HAVE ALREADY GREAT QUIALIFICATION ( DURON 650 @ 800, 1 burned duron700 , TB 700 @ 1000, TB 750 @ 1050) IN PENCILOVERCLOCKING, GUYS. SO:
1. Pencil connections are effective , cheap, can be perfectly cleaned, as there was no overclocking (exellent during upgrade).
2. The solution:
A) One extremely sharp HB or better more sharp pen
Soft one version of pencils is too soft ... I mean it will no way connect like :
| | | | .
it will connect like:
UT| .
The result - L1,L2 cache or NPU burn!
B) Connect verticaly , 5 or more passes up and down , layers must be thick.
if you are not sure , if some of the briges are connected wrong or look like connected wrong - take an eraser! Do not risk!!! Or there can be the same as at p. A
C) Again , be sure that there is no ... even graphite dust between the briges! and they are connected perfectly! - perfectly thick and perfectly | | | | . !!!
D) Do not blow on briges to prevent nanometic water drops between the briges , which also may destroy as it is said in p.A, if tere is some dust. Take a fan.
E) Place accuratly into MOBO's socket, do not touch connections!!! Also , do not touch them with your fan.
F) Try overclocking! If there is something strange you set 1000 - it displays 800 - you will have to make more up / down passes.
EnJoy!
P.S. I had to reconnect my Athlon - 6 times until it started working, but that was something!!
Also , SuperOrb is OUTSTANDING FAN ONLY IF YOU HAVE GOOD AIRFLOW IN YOU CASE! Suggested is ATX with horizontally located PB( at the top) , not vertically!
I HAVE ALREADY GREAT QUIALIFICATION ( DURON 650 @ 800, 1 burned duron700 , TB 700 @ 1000, TB 750 @ 1050) IN PENCILOVERCLOCKING, GUYS. SO:
1. Pencil connections are effective , cheap, can be perfectly cleaned, as there was no overclocking (exellent during upgrade).
2. The solution:
A) One extremely sharp HB or better more sharp pen
Soft one version of pencils is too soft ... I mean it will no way connect like :
| | | | .
it will connect like:
UT| .
The result - L1,L2 cache or NPU burn!
B) Connect verticaly , 5 or more passes up and down , layers must be thick.
if you are not sure , if some of the briges are connected wrong or look like connected wrong - take an eraser! Do not risk!!! Or there can be the same as at p. A
C) Again , be sure that there is no ... even graphite dust between the briges! and they are connected perfectly! - perfectly thick and perfectly | | | | . !!!
D) Do not blow on briges to prevent nanometic water drops between the briges , which also may destroy as it is said in p.A, if tere is some dust. Take a fan.
E) Place accuratly into MOBO's socket, do not touch connections!!! Also , do not touch them with your fan.
F) Try overclocking! If there is something strange you set 1000 - it displays 800 - you will have to make more up / down passes.
EnJoy!
P.S. I had to reconnect my Athlon - 6 times until it started working, but that was something!!
Also , SuperOrb is OUTSTANDING FAN ONLY IF YOU HAVE GOOD AIRFLOW IN YOU CASE! Suggested is ATX with horizontally located PB( at the top) , not vertically!