tbird week, and extra voltage

[ReFuGee DaWG]

how can i figure out what week my tbird is???


and what are the chances that i can get 50-100 more MHz by jumping up the voltage from 1.75 to 1.85 on my tbird?

thnx,
ReFuGee DaWG



=========
700tbird@900 (100x9)

[Hoot]

As long as you can keep that core below 45C, and ideally 40C, go for it. You may find that lowering the temp will result in not having to up the voltage. If it's already lowered, then try 1.85. It shouldn't fry anything. No reason why you should not be able to hit 10x100.

Hoot

[wild_andy_c]

That's true. Although I can do 1Ghz on a 100Mhz FSB and only 900Mhz on a 150Mhz FSB. Or what I'm trying to say is - do not assume people all own 100Mhz FSB boards.

With newer boards there seems to be some gorund between the highest speeds that can be achieved depending upon the bus settings used.

I know this kinda sounds a bit confusing, and it's not all to do with memory ability either.

.....just to state - never assume 10x 100 when 7.5 x 133 is a possibility

[proze]

just keep your proc temps below 55c-odd until full load. under 45c is a bit of a low target, and no harm will come to your proc below 55c. also, the extra 0.1v will probably get you your extra 100mhz. i'd say watch your temps and go for it.

[gamba]

A7V duron 650@850 1,6V Silver Orb(10000rpm).
Just the trick pencil over my duron, then change multiplier in the mobo and frecuency and voltages i do everything throw the bios.

It´s working very good. Sisoft Sandra Cpu Test is very near from PIII 1Ghz. What´s up???


I like AMD, Duron Y Via chipsets. Sorry, I like my ASUS A7V motherboard.