- Joined
- Apr 4, 2003
- Location
- Glastonbury, CT
I'm noticing really wacky temperature readings on my NF7-S 2.0 BIOS 1.7 board.
Particularly, my system was off for hours, completely room temp. As soon as I power-on the system and enter the bios health monitoring, my temps are as follows:
SYSTEM: 14C !!
CPU: 30C !!
ACTUAL ROOM TEMP: 21C (71F)
The system temp eventually reaches 23C; the CPU reaches 36C IDLE.
IF MY CPU READS 30C COLD HOW CAN I TRUST THE SENSOR?
If you have the same BIOS and REV card and care to perform this simple check, I'd really appreciate if you can post your results too.
Particularly, my system was off for hours, completely room temp. As soon as I power-on the system and enter the bios health monitoring, my temps are as follows:
SYSTEM: 14C !!
CPU: 30C !!
ACTUAL ROOM TEMP: 21C (71F)
The system temp eventually reaches 23C; the CPU reaches 36C IDLE.
IF MY CPU READS 30C COLD HOW CAN I TRUST THE SENSOR?
If you have the same BIOS and REV card and care to perform this simple check, I'd really appreciate if you can post your results too.
