a7v 900 tbird

[HAZZ2]

i dont know what im doing but this is whats happing i have the cpu multipler at 11.0 cpu frequency at 112 is this puting my ram at 149? and if so will it be okay??? help plz before i burn something :)

[Daniel ~]

Welcome to our forum! The best way to go about this is to get a brief background. Go to our home page and at the is a section intiltied "Begginners Guides" Read through them, won't take long. We put these articles together to help you gain what is needed to make the best use of our forum. Then come back to the forum,we will be waiting to get you started. Soon!":O}

Moved post to "AMD CPU"

[sad_b0i]

alright dude....
1. close your L1 pins...
2. change your multiplier to 10
3. change your FSB to whatever you can boot up with...i would say no higher than 110...anything in between...unless you have a good CPU fan...you can try higher speeds
3. crank up the cpu voltage...should be able to do in BIOS..do it in small increments till your cpu is stable
4. i recommend you get thermal paste for cpu...

should be running over 1.0GHZ stable if you did everything ive said...good luck!