Soltek75FRN2-L
Barton 2500+
512 MB Samsung PC3200
Volcano 9 at 3500 rpm
Vcore 1.80v
AGP 1.70v
VDIMM 2.8v
vdd 1.8v
Seems my Barton2500+ has it´s sweet stable spot at around 2300mhz and with idle temps at 39 and full load temps at 52
The settings I have with prime95 working for 3 hours is these:
10*230=2300mhz
10.5*220=2310mhz
11*210=2310mhz
11,5*200=2300mhz
Tested all these settings with SisoftSandra and since the only score that changes is the mem score att lower multiplier the 10*230 seems to be the smartest choice.
Didn´t really think my Samsungs would make it to 230 but I´m glad they did
I´m a beginner at this so i´m not 100% sure all these Volt settings and temps are ok but the cpu runs fine and have done so for the last couple of days
I tried 9.5*240 but that was not a speed my samsungs wanted to run at
Better cooling,ram and higher volts and maybe the 250 fsb would be a possibility..
Barton 2500+
512 MB Samsung PC3200
Volcano 9 at 3500 rpm
Vcore 1.80v
AGP 1.70v
VDIMM 2.8v
vdd 1.8v
Seems my Barton2500+ has it´s sweet stable spot at around 2300mhz and with idle temps at 39 and full load temps at 52
The settings I have with prime95 working for 3 hours is these:
10*230=2300mhz
10.5*220=2310mhz
11*210=2310mhz
11,5*200=2300mhz
Tested all these settings with SisoftSandra and since the only score that changes is the mem score att lower multiplier the 10*230 seems to be the smartest choice.
Didn´t really think my Samsungs would make it to 230 but I´m glad they did
I´m a beginner at this so i´m not 100% sure all these Volt settings and temps are ok but the cpu runs fine and have done so for the last couple of days
I tried 9.5*240 but that was not a speed my samsungs wanted to run at
Better cooling,ram and higher volts and maybe the 250 fsb would be a possibility..