fsb help

[jordan]

hey guys, I have a 1G thunderbird running at 1200 mhz stable on a kt7 with pc133 ram and a global winfop38 (full load temp is 48C using sisoft burn-in for 30 min straight)- anyway, I have to use a multiplier of 11x108) at 1.85V- I absolutly can not even get 1 more mhz on the fsb, even if i lower my multiplier I still cant get the fsb higher that 108mhz

anyone know why? what else can I try?

[FRANK]

The KT133 chipset isn't known for it's ability to run a FSB much higher than 110. If that's what you're looking for then you may have to go with one of the newer boards with the KT133A chipset.
I can't get over 107MHz on either my ASUS A7V nor my FIC AZ11. I've tried three different CPU's on each.

[AKDUDE]

My last motherboard had a KT133 chipset. I was lucky to get past 105.
Im using a epox with the KT133, and right now im at 150, and can run at 160, but the temps get to high ;(
Maybe its time for a upgrade, if running a low fsb bothers you.
AKDUDE