- Joined
- Jul 21, 2003
- Location
- Portland OR.
Long time reader, first time poster..
First of all.. Thanks to all of the members here for the TONS of information that I have gleened over the years.... My humble thanks.
Now, on to my question(s)..
My system is:
GA-7VAXP Rev.1.1
AMD 2000+ w/ copper HS and a 80mm fan converter runs at 47c. stock
Corsair 2700 512Megs
ATI 9700 Pro
Sound Blaster Live Value
I have searched and searched for the info I need. Although there is a number of threads concerning this mobo, I havent found THEE answer to my specific board.
Im wanting to O/C this system but I cant get the flexability to do this.
1. Is there a 1/5 divider available on this mobo?
2. Can I run this at 200FSB??
Someone posted cool pictures of this mobo, and the place you have to connect the solder joints, but it was a different release version and its a little different. My SW1 is the system bus frequency, and its not anywhere near the PCI slots as shown in the pics. There is no dip-switch there at all. Although there are the solder pads there for dip-switches.
While using EasyTune4 Im not able to move the CPU multiplier.
I know this mobo has the multiplier on the board in a dip-switch array. Is this the only way to change it, even if its set on AUTO?
In my first attempt to change the FSB to 166 my computer wouldnt boot at all.
Is there anyone that has done O/Cing to this board, that could assist me by showing me the steps to occomplish this goal.
Thanks
Deathjester
First of all.. Thanks to all of the members here for the TONS of information that I have gleened over the years.... My humble thanks.
Now, on to my question(s)..
My system is:
GA-7VAXP Rev.1.1
AMD 2000+ w/ copper HS and a 80mm fan converter runs at 47c. stock
Corsair 2700 512Megs
ATI 9700 Pro
Sound Blaster Live Value
I have searched and searched for the info I need. Although there is a number of threads concerning this mobo, I havent found THEE answer to my specific board.
Im wanting to O/C this system but I cant get the flexability to do this.
1. Is there a 1/5 divider available on this mobo?
2. Can I run this at 200FSB??
Someone posted cool pictures of this mobo, and the place you have to connect the solder joints, but it was a different release version and its a little different. My SW1 is the system bus frequency, and its not anywhere near the PCI slots as shown in the pics. There is no dip-switch there at all. Although there are the solder pads there for dip-switches.
While using EasyTune4 Im not able to move the CPU multiplier.
I know this mobo has the multiplier on the board in a dip-switch array. Is this the only way to change it, even if its set on AUTO?
In my first attempt to change the FSB to 166 my computer wouldnt boot at all.
Is there anyone that has done O/Cing to this board, that could assist me by showing me the steps to occomplish this goal.
Thanks
Deathjester