- Joined
- Jan 28, 2003
- Location
- California
This was a problem I didn't know was a problem, till I read some post about it.
When setting the multipliers in this range the post screen would show my speed with a 100 FSB, ie. 10.5x100 = 1050 mhz , no matter what I set the FSB at.
What I do is hit DELETE to re-enter the bios as you see this.
F10 then Y then ENTER.
It takes my settings on the second bios save everytime ? I had this before and after I did the L12 mod for the default 333FSB.
If you have this problem give it a try.
If someone knows whats going on, please enlighten me.
When setting the multipliers in this range the post screen would show my speed with a 100 FSB, ie. 10.5x100 = 1050 mhz , no matter what I set the FSB at.
What I do is hit DELETE to re-enter the bios as you see this.
F10 then Y then ENTER.
It takes my settings on the second bios save everytime ? I had this before and after I did the L12 mod for the default 333FSB.
If you have this problem give it a try.
If someone knows whats going on, please enlighten me.