- Joined
- Sep 22, 2001
- Location
- Lisbon@Portugal
Hello folks.
I've just assembled my system with :
Asus P4C800 Gold Version ( non-deluxe + ICH5R )
Intel P4 3.0C Boxed
Geil PC3500 2*256MB ULD Dual channel Pack ( 2-3-3-6@433Mhz )
Zalman 7000 AlCu CPU Cooler
PSU Be Quiet! 370Watts
WD SE 80 GB HD
I use Windows XP and don't OC until I'm not satisfied with the default speeds... i.e. FSB @ 200 ( 1:1 mems @ 400 ) !
Latest P4C800 bios, 1010 final
All power settings at Auto/Default, ex: vcore @ Auto (1.55v)
Just put the Performance Acceleration Mode to 'Enabled' , @ the Chipset Settings
The most agressive latencies I can boot is :
CAS ......................: 2
RAS Precharge ......: 2
RAS to CAS ...........: 3
Precharge Delay ...: 6
Burst Length .........: 8
But I can't boot the system at
CAS ......................: 2
RAS Precharge ......: 2
RAS to CAS ...........: 2
Precharge Delay ...: 5 or 6
Burst Length .........: 8
as almost of you guys can ! Even try with vdram @ 2.85v !
What's wrong ?!?
Is this system suposed to give me more performance or is just this ok ?
Other thing is the "JumperFree Configuration\Perfomance Mode", if I put it at 'Turbo' the system won't boot no matter what, even @ 2-3-3-6 ! Just works in 'Auto' or 'Standard' ! What does this option mean ?
Have I got a bad board or is the Geil DRR ?!?
Thanks.
I've just assembled my system with :
Asus P4C800 Gold Version ( non-deluxe + ICH5R )
Intel P4 3.0C Boxed
Geil PC3500 2*256MB ULD Dual channel Pack ( 2-3-3-6@433Mhz )
Zalman 7000 AlCu CPU Cooler
PSU Be Quiet! 370Watts
WD SE 80 GB HD
I use Windows XP and don't OC until I'm not satisfied with the default speeds... i.e. FSB @ 200 ( 1:1 mems @ 400 ) !
Latest P4C800 bios, 1010 final
All power settings at Auto/Default, ex: vcore @ Auto (1.55v)
Just put the Performance Acceleration Mode to 'Enabled' , @ the Chipset Settings
The most agressive latencies I can boot is :
CAS ......................: 2
RAS Precharge ......: 2
RAS to CAS ...........: 3
Precharge Delay ...: 6
Burst Length .........: 8
But I can't boot the system at
CAS ......................: 2
RAS Precharge ......: 2
RAS to CAS ...........: 2
Precharge Delay ...: 5 or 6
Burst Length .........: 8
as almost of you guys can ! Even try with vdram @ 2.85v !
What's wrong ?!?
Is this system suposed to give me more performance or is just this ok ?
Other thing is the "JumperFree Configuration\Perfomance Mode", if I put it at 'Turbo' the system won't boot no matter what, even @ 2-3-3-6 ! Just works in 'Auto' or 'Standard' ! What does this option mean ?
Have I got a bad board or is the Geil DRR ?!?
Thanks.