- Joined
- Jun 29, 2003
- Location
- West fakin coast
Well i have tried it all i think i am so tired of this. Need some suggestions here.
Today trying another pc3200 ocz 512 stick in the system.
2100 amd chip
2X512 ocz pc3200
volcano 9 heatsink
ati 9500 pro
soltek 75FRN2-L
bios 1.2 Version
1.8 vcore/ 1.5 agp/2.8 dimm/ 1.7 vdd
settings in all the trials were expert fsb ((speed))/ optimal 6-3-3-2
I have no setting for the % like the 1.1 bios
what i am at right now:
#1.
2.12ghz
2120MHZ
mem band sandra 2814
184fsb 11.5 X multiplier
3dmark 12486
ran prime 95
This is with 2 512 sticks/ 1024 ram
#2 what i was running (all weekend last)
210fsb 9.5 multiplier
3dmark worked prime 95 no go ran torture test to 5th onee then rebooted.
Gamed UT 2003 Ut original Halflife & CS for the night.
Will not run with 1024 ram only a 512 stick? WTFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF is this about?
benched 13100 3dmark
#3 test.
190fsb 11X multiplier
1024 ram
mem band: 2903
2.09 ghz
2074Mhz
benched 12384
Ran prime 95
#4
200fsb @
10 multi= 2.00Ghz
10.5 multi = 2.11Ghz
11 will not go at all reboots at start up GRRRRRRRRR
mem band 3097
Tried 9-10.5 mult with 1024 no go does not run bench nor prime nor will allow me to surf with out spuing errors and shutting me back to the desktop............
***The above is with a 512 stick only......***
What is up, is it my bios 1.2 version? I am getting really ****ed at this board. I wanted to run the 210 fsb at 9.5 with the 1024 it was snappy and really nice now i cannot run 1 gig of rma i have to run 512? wtf IS UP HERE!!!!! Aksed around to figure out if it was my chip? guess not my ram? possibly, My bios? i dunno so i went asking last night to figure out about flashing the bios heard it can be a nbightmare? I mid as well get the nF7 and try it out? It seems to be not as picky with ram? This soltek was doing well till the new stick of ram came into play!
Someone got to have a explanation
I really like this board i want it to make sence to me. Why will it not run the settings i want it to run?its worse than my X girlfriend...
Someone got to have a set of ocz pc3200 that htey have tried or didn't like please tell me that is the case?
I will trade these in and get others that jive with the board?
I am aloss help meeeeeeeeeeeeeeeeeee
Today trying another pc3200 ocz 512 stick in the system.
2100 amd chip
2X512 ocz pc3200
volcano 9 heatsink
ati 9500 pro
soltek 75FRN2-L
bios 1.2 Version
1.8 vcore/ 1.5 agp/2.8 dimm/ 1.7 vdd
settings in all the trials were expert fsb ((speed))/ optimal 6-3-3-2
I have no setting for the % like the 1.1 bios
what i am at right now:
#1.
2.12ghz
2120MHZ
mem band sandra 2814
184fsb 11.5 X multiplier
3dmark 12486
ran prime 95
This is with 2 512 sticks/ 1024 ram
#2 what i was running (all weekend last)
210fsb 9.5 multiplier
3dmark worked prime 95 no go ran torture test to 5th onee then rebooted.
Gamed UT 2003 Ut original Halflife & CS for the night.
Will not run with 1024 ram only a 512 stick? WTFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF is this about?
benched 13100 3dmark
#3 test.
190fsb 11X multiplier
1024 ram
mem band: 2903
2.09 ghz
2074Mhz
benched 12384
Ran prime 95
#4
200fsb @
10 multi= 2.00Ghz
10.5 multi = 2.11Ghz
11 will not go at all reboots at start up GRRRRRRRRR
mem band 3097
Tried 9-10.5 mult with 1024 no go does not run bench nor prime nor will allow me to surf with out spuing errors and shutting me back to the desktop............
***The above is with a 512 stick only......***
What is up, is it my bios 1.2 version? I am getting really ****ed at this board. I wanted to run the 210 fsb at 9.5 with the 1024 it was snappy and really nice now i cannot run 1 gig of rma i have to run 512? wtf IS UP HERE!!!!! Aksed around to figure out if it was my chip? guess not my ram? possibly, My bios? i dunno so i went asking last night to figure out about flashing the bios heard it can be a nbightmare? I mid as well get the nF7 and try it out? It seems to be not as picky with ram? This soltek was doing well till the new stick of ram came into play!
Someone got to have a explanation
I really like this board i want it to make sence to me. Why will it not run the settings i want it to run?its worse than my X girlfriend...
Someone got to have a set of ocz pc3200 that htey have tried or didn't like please tell me that is the case?
I will trade these in and get others that jive with the board?
I am aloss help meeeeeeeeeeeeeeeeeee
Last edited: