- Joined
- Jul 23, 2003
- Location
- Crowley, TX
How many fans do you have total in your computer? I have 9 personally.
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
How many fans do you have?
- Thread starter masterchief
- Start date
below....
2 80mm-rad
2 80mm-back of case (1 in 1 out)
2 80mm-psu (1 in 1 out)
1 80mm-side blowhole (in)
1 80mm-hdd "cage" (in;3 hdd's)
1 crystal orb-nb (dont work for monkey B@**$ i get better temps with nothing at all on my nb)
1 vantec icberg-video
total=10
would be more but i dont think i have enough places to put um
2 80mm-rad
2 80mm-back of case (1 in 1 out)
2 80mm-psu (1 in 1 out)
1 80mm-side blowhole (in)
1 80mm-hdd "cage" (in;3 hdd's)
1 crystal orb-nb (dont work for monkey B@**$ i get better temps with nothing at all on my nb)
1 vantec icberg-video
total=10
would be more but i dont think i have enough places to put um
- Joined
- Dec 23, 2002
- Location
- Doylestown, PA
I have 6 counting my PSU fans.
2 on my heatercore, 2 exhaust, and 2 on the PSU.
P.S. Masterchief: I think that your sig may be in violation of the sig rules. Not trying to be a stickler, but I though I would let you know before a mod notices.
2 on my heatercore, 2 exhaust, and 2 on the PSU.
P.S. Masterchief: I think that your sig may be in violation of the sig rules. Not trying to be a stickler, but I though I would let you know before a mod notices.
- Joined
- Jun 11, 2003
- Location
- Auckland, New Zealand
2 at low front in : lian li's standard
1 at back : lian li's standard
1 at top : lian li standard
1 for psu : psu standard
1 for hs :sf2 with temp censor
1 for duct mod direct to hs's fan : sf2 with manual adjustment
1 in internal case blow up through the gap between VGA card and hard drive : Vantec stealth (i'm hoping that will push my front 2 cold air up to NB and SB quicker)
All fans are 80mm
1 at back : lian li's standard
1 at top : lian li standard
1 for psu : psu standard
1 for hs :sf2 with temp censor
1 for duct mod direct to hs's fan : sf2 with manual adjustment
1 in internal case blow up through the gap between VGA card and hard drive : Vantec stealth (i'm hoping that will push my front 2 cold air up to NB and SB quicker)
All fans are 80mm
- Joined
- Aug 29, 2002
- Location
- Lewiston Maine
5 on my dually 2 80mm cases 2 60mm HS and 1 PSU I hope to knock it down when I make it H2O 1 120mm on the rad acting as the case fan too and the 1 PSU
- Joined
- Jun 4, 2002
1 side window intake
2 front intake
2 back exhaust
1 PSU exhaust
1 Northbridge
1 GF4 TI4800SE
1 CPU
total = 9
2 front intake
2 back exhaust
1 PSU exhaust
1 Northbridge
1 GF4 TI4800SE
1 CPU
total = 9
- Joined
- Jun 8, 2002
- Location
- Dunstable, uk
3. cpu,gpu and psu.
- Joined
- Oct 26, 2002
- Location
- Huntingdon UK
2. 80mm rear, both exhaust
1. 80mm front intake
1. 80mm harddrive cage intake
1. 80mm 4000rpm delta HSF blowing
1. TI4200 ASUS fan
2. 80mm psu fans
1. side panel intake
9 all together
hopefully going to get an orb/iceberg for the NB
1. 80mm front intake
1. 80mm harddrive cage intake
1. 80mm 4000rpm delta HSF blowing
1. TI4200 ASUS fan
2. 80mm psu fans
1. side panel intake
9 all together
hopefully going to get an orb/iceberg for the NB
- Joined
- Aug 12, 2002
15
- Joined
- May 24, 2003
- Location
- southeast MN
7 case, 1 cpu, 1 psu, 1 northbridge, 1 vga, going to install 4 120s for watercooling radiator, so umm, plenty
- Joined
- Mar 3, 2003
- Location
- New Jersey
80 mm
2 front intake
1 side intake
2 back exhaust
1 psu exhaust
1 cpu
92mm
1 psu exhaust
no video/northbridge (zalman products are great!)
8 Total
2 front intake
1 side intake
2 back exhaust
1 psu exhaust
1 cpu
92mm
1 psu exhaust
no video/northbridge (zalman products are great!)
8 Total
- Joined
- Jun 22, 2003
- Location
- Vancouver Canada
5 case fans
2 small ones on GPU
1 cpu
2 PSU
2 small ones on GPU
1 cpu
2 PSU
- Joined
- Jul 11, 2003
- Location
- Central Nevada
So here's a question related to this, what about orientation? Do most of you have them placed bottom up, so that you're pulling air in at the base and exhausting at top/back? I'm curious as I'm getting ready to add a few more fans to to my setup as the measly 4 I have just don't cut it. Unfortunately my computer room is quite warm during the summer and my system is running at 36°C/70°C under load consistently with an open case and a house fan on it at the moment. It locks up if I don't do this.
What concerns me is that my system sits on the floor, and gets quite dusty. So pulling air into the system with bottom mounted fans would probably just worsen the condition I'm thinking. Filtering is an option, but I'm undecided on what material works best without affecting airflow.
What concerns me is that my system sits on the floor, and gets quite dusty. So pulling air into the system with bottom mounted fans would probably just worsen the condition I'm thinking. Filtering is an option, but I'm undecided on what material works best without affecting airflow.
- Joined
- Nov 27, 2002
I've got a total of 4 fans.
CPU Cooler
VGA Cooler
Power Supply
Front intake
This leaves my OCed temps at around 42c when it's 90f out - I'm ok with that.
-Jeff
CPU Cooler
VGA Cooler
Power Supply
Front intake
This leaves my OCed temps at around 42c when it's 90f out - I'm ok with that.
-Jeff
