I'm so close,600@950

[blujay]

Been trying to hit a gig, A7v with duron 600 @ 1.85v current @ 950. Temps @ 38c under load. Will post @ 1gig but blu screen into windows. Is it the luck of the draw on the processor? Won't complain, 950 on a 600 is not to bad but would love to see 1gig and be stable. Any ideas?
thanx,
blujay
A7V 600@950
1.85v
256micron
voodoo5

[Hoot]

Try 1.9V
Your temps look like your HSF is doing its job properly.

Hoot

[Wega!]

U can't go higher than 1.85V (read in the bios) wtih the A7V, unless u do the volt mod.

[FRANK]

I have a couple of DURON 600's, the best will post at 1100MHz on an A7V, not real stable, good at 1050, the worst is "only " good for 978MHz.

I'm playing around with an A7V133, now I can get over 133MHz FSB, right now running it at 122 * 9

Luck of the draw, I'd say.

[ken257]

Your temps look good so I think you are going to have to do the voltage mod on the A7V to reach a gig, just 1 more notch up might be all it takes.

[blujay]

Thanks everyone, appreciate everyone who responded. I think I'll stay with 950 don't really want to do the volt mod. But in time maybe the solution will come forth. Thanks again everyone!
blujay

[cookedcomp]

if it is a green core you will need to up the vcore to 1.9(volatge mod) in order to even see those hights.my duron 700 blue core dose 1109 at 2.2vcore(296 DDr)