View Full Version : Post your processor codes here!
Nagorak
03-23-01, 07:08 AM
I know we're supposed to do this in the CPU database, but hardly anyone does, so I'm going to try to start a thread here instead. Just post your processor code, it's rated speed and the maximum overclock you have managed with it (please specify if you are using something besides forced air).
Try to keep the chatter to a minimum and just post your codes for all of our benefit! Thanks!
Nagorak
03-23-01, 07:11 AM
AGGA: Tbird 900 @ 1120 w/GlobalWin WBK38 "hacked"
ADFA: Tbird 900 @ 1050 w/GlobalWin FOP38 "hacked"
(more to come soon when I get a chance to check them).
ADEA: Tbird 650 @ 1000 w/Swiftech MC-462A
AHEA T-Bird 850 @ 1000 1.85v, 1100 2.16v FOP38
AXIA 1.2 gig Bird stable at 1425 mHz. This will go up with a replacement KT7A-R and a 172 watt pelt this weekend.
See my sig for Bird #2
PimpDaddy
03-23-01, 11:00 AM
have a 800@970 adea
1200@1420 axia
in a 1.33 in the mail
{X-H}KnownKiller
03-23-01, 12:56 PM
People please post your chip codes and cooling H/S and or Water, peltier ect...
Heres mine..
AMD 1.2 (266) AXIA blue core
AXIA 0107GPDW
Y6D42250303
IWILL KK266R W/ TUROK TURBO BIOS
ThermoEngine (Black HEATSINK) Thermo silver II Delta 7200 RPM fan.... at 1.95 volts i get around 95 F and 102 F full load after many hours.....
Still burning it in..
Same damn chip as the 1 i seen some guy have in japan that got some outragous 1.8 GIG with!
Though i cant get it stable above 1.4 gig though i'm able to post all the way up to 1.490!!!
Dont know if another heatsink thats better will help or not since its really not a heat prob at the moment...
KnownKi||er]LBA[
AEEA week 24 blue T750, volcano ii, 1.75v, 7.5x133, 1001mhz, haven't tried higher
YahooDave
03-23-01, 10:24 PM
AGGA 900mhz T-Bird @ 1102mhz
10.5 x 105 fsb
Swiftech 462A
cookedcomp
03-23-01, 10:35 PM
AKBA Duron 700 @ 1109Mhz (water cooled) 2.20 vcore
Nagorak
03-24-01, 12:10 AM
AHEA: Tbird 750 @ 1050
T-bird 800@950 ADFA0036XPGW, Alpha PAL 6035
T-bird 1200@1347 AXIA010SRPBW, Alpha PAL 6035 (went to disneyland, RMA'ing it for a new one, should be here next week)
AXIA 1200@1450 Posts at 1500 unstable (voltage mod will take care of that soon..) PAL 6035 W/Delta
Bartman
03-24-01, 04:34 PM
"AGGA" TBird 900
FOP32-1
*CPU still locked*
Runs 1038Mhz @ 1.70v
Will unlock CPU, put 80mm Panaflo HO (39cfm) and Lap the HS next week, and post max overclock results.
DEFAULT Voltage will post just over 1100Mhz.
dr_piper
03-24-01, 08:23 PM
Tbird 800 overclocks to ~950MHz
using 7*133MHz on KT7A-raid ATM
AFFA 0040 XPDW core
1.80 volts
AXIA0107GPGW
Still waiting for my KK266 back from Iwill.
Steamer
03-25-01, 12:44 AM
1.2 266 blue core
AXIA0107GPDW
1.466 Stable, A7V133, 1.85 VCore, Alpha Pal6035
Kriegster
03-25-01, 01:08 AM
1.2 266 avia
stable at 1420 mhz at 1.9 vcore with aircooling
EXTREMEONE
03-25-01, 01:55 AM
The new AMD 1.33 /266 T.B. w/ IWILL KK266, M.B. 256 M.B., PC 133 micron cas2,
IBM 30 gig Deskstar ATA 100 H.D., 64 MB. Herclues GTS,
Got it up to 1.6 first time after inital setup and download of kk0307.bin bios!!
K7800MPR52B - 710027123084
core:7950CNRBEA, K0030800775, OD23MPMW
K7800 @ 1080 (108 X 10 ), 1.9 V-core w/ 2/5 L2 multiplier, i need to lower the multiplier to 1/3 to get better performance, but it runs stable.
system info:
cpu:K7-800 w/ aTD2 GFD
heatsink: Alpha P-7125
mobo: Abit Ka7-100 flashed w/TY version bios
sdram: 768 mb pc-133 cl3, 2-256 2-128
video card:Voodoo 3 3000 ( i know i need a new card)
sound card: Sound Blaster Live Platinum
hard-drive('s): 2 Maxtor ATA/66 @ 7200 rpm, 1-30 1-15g
lots of fans !!!!!!!!!!!
1GHz TB AXIA0109BPDW
1.606GHz @ 2.02V (146MHz x 11.0)
Watercooling at room temp.
950 Tbird AEEA (purple core).
axia 1.2 @ 1457 havent tried to push it yet
Metaxas
03-25-01, 08:13 PM
T-Bird 1200 BVHA stable at 1440, and is completely stable at 1466 also, but my ram can't hang with a fast RAS and CAS over 137FSB on my Iwill KA-266R. So, I didn't try to fine tune it over 1466. I tried for 1507 (11 x 137 - to be able to keep the ram on the super fast settings) but it would not post. at 1440 it works fine at 1.825. Same for 1466 too, just slightly lower mem scores....
harderclock
03-25-01, 09:32 PM
t-bird 900 adfa stock heatsink-fan still locked cause the pencil trick didnt work twice running at 1098(fsb 122) with no problems and temps between 31-45 under load. id say not bad at all wait untill i get the defogger kit. oh ya its on a kt7a maxtor 40 gig(7200) 128 megs crucial cas 2 ram soundblaster 512 radeon 64 meg ddr
will post at 6.5x138/30@897 but get windows protection error.no time to tweak voltage yet . regular heatsink.code is adea.
AXIA0108VPBW (1.2/200 tbird)
@1.6Ghz ,2v Vcore, ASUS A7V-133.
Water cooled (Swiftech MCW462), normal ambient cooled water temp(around 20c ambient, 23c-28c water).
kamikaziken
03-27-01, 05:22 PM
axia 1200 tbird @1425 no voltage increases air cooled I think there is a lot more left in this chip. It never flinched when I made an increase.
AXIA0110 1gig/266
@1400 1.775Vcore on MSI K7Tpro2-a
Fop32-1 -a little warm
No more fsb left on this board.
SharkyTM
03-29-01, 06:21 PM
Axia y-series, 1200 t-bird, 266 bus, running at 1200............ dont ask.............. PAL6035 w/ sanyo Denki (Dinky) fan, soon to be a delta 7000 38cfm....... more cooling power, once i reformat :( i will post new speeds... right now, its barely stable in windows... make that unstable.
SharkyTM
AXIA Y-series 1gig 266fsb / just put it in running stable @1410 10.x@141fsb / 1.80core voltage / 53C idle (silver orb it sucks) on A7V133
1Ghz (200 fsb)
AXIA0110BPAW
ABIT KT7A (no RAID)
Alpha PAL 6035
Presently at 10*137 = 1370 Mhz. Idle 27C, full load 43C. Easily can go for more but happy with current speed.
AXIA0107GPGW
1.2GHz waiting for replacement Iwill KK266
Will be watercooled.
Tbird 100ghz AXIA (100 FSB) Stock for now...
Executor
04-03-01, 04:21 AM
266fsb 1.2ghz AXIA 0108TPGW
asmodean
04-03-01, 04:39 AM
AJFA Tbird 900@980 (1143 with new PSU should be stable), Alpha PEP66T with 2 60x60x10mm temp. controlled fans sitting atop each other.
I know, temp. control & HS=BAD, but idle=29C.
I'm going to change them soon.
Just got my replacement T-bird back and the codes are as follows:
A1200AMS3B
AVIA0108EPAW
Y6057050813
Haven't installed it yet but it should be ok for overclocking now that I have a watercooling setup.
michaelkahl
04-03-01, 06:45 PM
[ADFA] week 39 Athlon 800@1000 stable under w2k
don't know if Durons are code specific but heres my Duron code
[AKBA] week 36 Duron 600@1050 stable w2k
ADEA Green core tbird 800@930 stable
third line starts with a 9
thermoengine cooled with delta 7k @31C idle
Very early tbird, came with the bridges unlocked!
SickBoy
04-03-01, 10:47 PM
Blue core AMCA Duron, week 2 2001, oc's to 954 (136x7) on a KT7A Raid with a FOP32 and generic grease.
SickBoy
fluxcapacitor
04-04-01, 10:12 AM
I have an 800 T Bird that I can get to 1040, but that's it. @ 1050 I get WIndows protection errors, BSOD's, etc. Anyhow, it's AFFA0041. The 0041 is year 2000, week 41 right? If you know you have this chip, post here, I'd like to hear how high you can get. Maybe when the Swiftech MC 462 gets here it'll lemme go 1050, but I doubt it.
earthdick
04-04-01, 04:32 PM
T'Bird ADFA week 37 800@866 266fsb on Iwill KK266 with Win2k. I think it is a blue core but I am not an expert on distinguishing between blue or blue-greenish. I want to wait for the Millenium HSF before I try to push it higher. The coolermaster hsf I have now lets the temp get up to 43deg C. when running folding@home.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.