glazer1972
07-31-03, 11:09 AM
This is my first computer!
Just 4 PC Full-Tower Case w/ 425 W Pwr Supply
Asus A7n8x Deluxe w/ Rev1005 Bios
Amd Athlon XP2100+ Thourobred Core @1733 mhz
Thermaltake Volcano 7+ @6026RPM Blowing into Heat Sink
PNY PC2100 512MB DDR 266Mhz
ATI Radeon 7000 Video
Soundlaster live 5.1 Sound
Western Digital 160 GB Hard Drive @137 GB (No Controller Card installed)
I/O magic 52x24x52x CD-RW
Star Logic 3.5" Floppy Drive
NEC LCD1760v 17" LCD Display
Logitech Cordless Elite Duo Keyboard and Mouse
Antec 80mm Front Bottom Intake @ 2884 RPM
Antec 80mm Smart Fan Rear Top Exhaust @ 2343 RPM
ASUS Probe Temps are as follows:
Case Closed:
CPU 42 deg C
MB 28 deg C
Case Opened:
CPU 38 deg C
MB 28 deg C
Here is a link to the case:
www.just4pc.com/620.htm
I was thinking of adding one or two more fans. Do I need too. If so any suggestions. I was thinking of one intake in the side panel directly over the cpu and a top blowhole exhaust directly over the hole in the top of the chassis. You can see it in the bottom left picture. That would give me 2 intake 2 exhaust (not counting the pwr supply exhaust) and the cpu fan.
Just 4 PC Full-Tower Case w/ 425 W Pwr Supply
Asus A7n8x Deluxe w/ Rev1005 Bios
Amd Athlon XP2100+ Thourobred Core @1733 mhz
Thermaltake Volcano 7+ @6026RPM Blowing into Heat Sink
PNY PC2100 512MB DDR 266Mhz
ATI Radeon 7000 Video
Soundlaster live 5.1 Sound
Western Digital 160 GB Hard Drive @137 GB (No Controller Card installed)
I/O magic 52x24x52x CD-RW
Star Logic 3.5" Floppy Drive
NEC LCD1760v 17" LCD Display
Logitech Cordless Elite Duo Keyboard and Mouse
Antec 80mm Front Bottom Intake @ 2884 RPM
Antec 80mm Smart Fan Rear Top Exhaust @ 2343 RPM
ASUS Probe Temps are as follows:
Case Closed:
CPU 42 deg C
MB 28 deg C
Case Opened:
CPU 38 deg C
MB 28 deg C
Here is a link to the case:
www.just4pc.com/620.htm
I was thinking of adding one or two more fans. Do I need too. If so any suggestions. I was thinking of one intake in the side panel directly over the cpu and a top blowhole exhaust directly over the hole in the top of the chassis. You can see it in the bottom left picture. That would give me 2 intake 2 exhaust (not counting the pwr supply exhaust) and the cpu fan.