AMD k62 500

[acom]

Could someone help with setting to overclock my k62500. I'm using a DFI k6xv3+66 board. I'm new to this and could really use some help.

[TT120]

I just recently tried to O/C one of these processors and it didn't like running much past 550 and even then it didnt seem to be 100% stable. I went from the x5 multiplier to 5.5. It didnt seem to like it when I tried to raise the FSB at all but that might have been the ram although I'm not sure.

[PimpDaddy]

friend is trying to do the same thing only got to 525 with 105 fbs
when everthing was said and done he bought my old a7v and 800tb from me .
them chips don't work very well even the data base does not show to much overclocking to them

[Blackearth]

i've tried to get my k62 450 to run at 500, too many problems. you'll be lucky to get to 550 i guess. . .

[Gunjaa]

My k6-2 500 would run stable at 550@2.4v
They hate runnin anything above 100mhz FSB.
A little hint for boards with 5.5x max multiplyer,set it on 2.0x and the amd k62's recognize this as 6.0x. (no ****)
I could never get stable at 600 and know of F***all ppl who have.

[samuknow]

I have a K6 II 450 @ 504 4.5x112

very stable runs cool with a GORB

These things like to be cooled. This may be your prob. They also like their voltage. Try bumping the v up a point at a time till it runs stable.

[SickBoy]

With good cooling (i.e. most any decent cooler, even a gorb or pretty much any good sized socket A cooler) you can safely give the K6-2's plenty of voltage. Mine needed 2.8 volts to do 560 MHz, it didnt do much more, so don't expect the world.

SickBoy

[cool]

I had a K6-2 450 AFX 2.2 V that easily overclocked to 500 with watercooling and 2.4V. Now I have a K6-2 500 AFX 2.2V overclocked to 550 2.5V whit a big heatsink and thermal compound, a 80mm case fan mounted on the heatsink and case ventilation. The fan and CPU are lapped. With standard heatsink then it only runs stable at 525 at 2.4V. Heat is a big problem.

[malbolgia]

i also have the same board but with a 550 k62 proccesor
so do i just have to increase the voltage to over clock ir?