Please Help

[Monster pc]

Ok I got a new mobo and tbird, I am trying to oclock it and it just ain't happening, I connected the L1 bridges with rear defroster epoxy and the L7 the cpu is rated for 1.1gig I can't get it above 1.150gig I tried 10.5x110,10x120,12x100, nothing will work I used a magnifying glass to confirm the bridges are closed and they are I even opened the one L7 that I closed. please help any info would be greatly appreciated.

[proze]

what sort of voltage are you putting through the processor? and how are you cooling it? it's pretty vital that you get these two right for a good overclock. also, perhaps the AJEAs just aren't overclockers... how old is the proc?

[Monster pc]

the voltage is 2.85 and the cooling is done by a fop38

[cntw82oc]

you do mean 1.85 right?

[Monster pc]

cntw82oc (Mar 29, 2001 04:48 p.m.):
you do mean 1.85 right?

Yes 1.85 sorry

[AZZKICKER]

first off what are your temps

second what thermal past u useing between the heatsink and CPU?

third what bios you running on that board?

fourth what is your I/O voltage at??

[AZZKICKER]

and whaen you say nothing works

does it even POST?

[proze]

AZZKICKER (Mar 30, 2001 11:34 a.m.):
and whaen you say nothing works

does it even POST?

good question, azz!

???

[Basher]

Monster pc (Mar 30, 2001 10:15 a.m.):
Ok I got a new mobo and tbird, I am trying to oclock it and it just ain't happening, I connected the L1 bridges with rear defroster epoxy and the L7 the cpu is rated for 1.1gig I can't get it above 1.150gig I tried 10.5x110,10x120,12x100, nothing will work I used a magnifying glass to confirm the bridges are closed and they are I even opened the one L7 that I closed. please help any info would be greatly appreciated.

Did you try 11x110? What are your temps? I would suggest tring to oc with FSB first if that works then you must not have connected the L1's.

[Monster pc]

AZZKICKER (Mar 30, 2001 11:34 a.m.):
first off what are your temps

second what thermal past u useing between the heatsink and CPU?

third what bios you running on that board?

fourth what is your I/O voltage at??



first my temps are about102-102f,im useing artic silver II, the bios date is 12/15/2000 the code? is8363-686b-6a61ma19c-ww, my I/O voltage is 3.40v

I tried to reapply the defrost paint then cleaned the bridges good and tried a pencil i cant think of any thing ells to do. do the l7 bridges make a difference

[Monster pc]

AZZKICKER (Mar 30, 2001 11:34 a.m.):
and whaen you say nothing works

does it even POST?



sometimes it will post if i overclock the fsb but if I put the mutiplier above 12x it wont post, and i have been very carefull just to connect each bridge without crossing over to the next.

[AZZKICKER]

try the WZ FInal Bios and see if it helps

[Monster pc]

AZZKICKER (Apr 03, 2001 02:19 p.m.):
try the WZ FInal Bios and see if it helps


I just downloaded it. I have never flashed a bios before, any tips or suggestions on how to do that?