Duron 600 @ 933... Any faster?

[mamisano]

I just got my RMA'd Duron 600 back from AMD. It is a week 01, not sure of the code though.

I currently have it running at 6x155 or 933mhz @ 1.65v. HS/F is FOP32-1 and current temps are 104f under Full SETI load.

My problem is that the KK266 is giving me problems with the 6.5-7.5 multipliers. It is a Rev 1.2 board, but no luck at those multipliers (even at 133FSB).

My memory is all but maxed out (Kingmax PC133) so what should I do? -or- should I just be happy to get 933 out of my 600?

Later

[Hoot]

Yo Mike, you did unlock the L1 (multiplier) traces on your CPU didn't you?

Hoot

[rugby]

You should probably up your voltage also.

[Rob Cork]

rugby (Apr 03, 2001 02:45 p.m.):
You should probably up your voltage also.

Yeah, as long as your temps don't go much above 50C (120f) you can raise the voltage as much as you like - I'd have thought to at least 1.8 before temps become a problem. That ought to get you the gig :-)

[mamisano]

Yes, I used the good old Pencil trick....maybe I should re-do it.

Current temps are 42c with the FOP32-1. I will play around some more and let you know how it works...

[mamisano]

Okay guys, Pencil trick was FUBARd so I re-did. Now running 1008mhz (6.5x155) @ 1.8v and 46c.

CPU code is AMCA

Had some problems being stable at higher speeds, so thats it for now. Not bad for an air-cooled 600.