I pulled an AMD Athlon 1200 @ 266MHz out of the box, slapped in on a new motherboard, let the bios detect everything. Belarc says i am getting 900MHz.
I have been reading for the last two days on AMD's. Here are the number off the processor.
A1200AMS3C
AXIA0118MPMW
Y6307250396
So it should be running at 1200 MHz, FSB 266, and run about 95 deg.
I have downloaded GCPUID and here is what it says
Processor #1
Processor Information:
CPU Vendor: AuthenticAMD
Processor: AMD Athlon(TM) (Thunderbird)
CPU Type: Original OEM processor
Name String: AMD Athlon(tm) Processor
CPU Speed: 900.04MHz
CPUID Information:
Standard: Family: 6 Model: 4 Stepping: 2
Extened: Family: 7 Model: 4 Stepping: 2
Process: 0.18µm
Revision: A4-A7
Basic Cache Information:
L1 Instruction Cache size: 64KBytes
L1 Data Cache size: 64KBytes
L2 Cache size: 256KBytes
Instruction Set:
MMX: Supported
3DNow!: Supported
3DNow!+: Supported
MMX+: Supported
SSE: Not Supported
SSE2: Not Supported
Thermal Monitoring: Not Supported
I checked my L1,2,3,4,5,6,7 And it looks like they have all been cut. So does this mean that i need to bride all of them or only certain ones?
CompFX
I have been reading for the last two days on AMD's. Here are the number off the processor.
A1200AMS3C
AXIA0118MPMW
Y6307250396
So it should be running at 1200 MHz, FSB 266, and run about 95 deg.
I have downloaded GCPUID and here is what it says
Processor #1
Processor Information:
CPU Vendor: AuthenticAMD
Processor: AMD Athlon(TM) (Thunderbird)
CPU Type: Original OEM processor
Name String: AMD Athlon(tm) Processor
CPU Speed: 900.04MHz
CPUID Information:
Standard: Family: 6 Model: 4 Stepping: 2
Extened: Family: 7 Model: 4 Stepping: 2
Process: 0.18µm
Revision: A4-A7
Basic Cache Information:
L1 Instruction Cache size: 64KBytes
L1 Data Cache size: 64KBytes
L2 Cache size: 256KBytes
Instruction Set:
MMX: Supported
3DNow!: Supported
3DNow!+: Supported
MMX+: Supported
SSE: Not Supported
SSE2: Not Supported
Thermal Monitoring: Not Supported
I checked my L1,2,3,4,5,6,7 And it looks like they have all been cut. So does this mean that i need to bride all of them or only certain ones?
CompFX