- Joined
- Jul 3, 2001
- Location
- Houston Texas
Have a SLK800 mounted to a Soltek SL-75MRNL with a 2500 Barton...Temps are around 40C at idle...Remounted it using Ceraminqe, AS III, the stuff that came with the SLK800 and no change...The two pads that would be on the bottom are smashed flat like the heat sink is hanging down and causing it not to make full contact with the processor and when runnning 3D Mark or PC Mark the temps go way up 48-49 C...Put a SK-6+ with a TMD fan on it and it idles around 38...With the 800 it just slides around...You can move it around with absolutely no resistance what so ever...Any help or ideas would be greatly appreciated...Thanks!!!