• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

AXDA2500DKV4D Y864937200242 AQXEA0330VPMW stepping is good or not

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
Merhaba, you can have a bad 1700+ stepping but 2500+ Bartons are all good.

You should post the rest of your setup. That's what you can be worried about since that's what's going to limit them.

_____________________
2100+ AIUHB 0248 MPMW
256MB Crucial PC2100 + 2x 256MB Kingston (Hynix chip) PC2100 @ 6 3 3 2
[152] FSB x 15 = 2280 MHz @ 1.8 Vcore with memory frequency at 100% [152] @ 2.77 Vdimm
37(min) C to 46(max) C Winter ; 42(min) C to 50(max) C Summer
Epox 8RDA+
Thermalright SK-7 with variable speed 80x25mm YS-Tech FD1281259B-2F
BFG GeForce4 Ti4200 8X 128MB; Antec SX-835II case ; 350W Antec SmartPower SL350
 
abit nf7-s v2.0 2*ddr 400 twinmoss ram.c627627 in turkey all of bartons are not good.some bartons stuck at 2200 mhz.I search hit can 2400 2500 mhz barton.
 
Last edited:
Hm... 2.2 GHz maybe because there's not enough vcore voltage.

Average is 2.3. Anything more is luck + you have good ram but what about cooling and power supply brand? That also maybe why some hit 2.2 and not more.
 
my hsf is volcano 11,psu 300 watt aopen fsp.case aopen h600b.some bartons cant reach 2300 mhz at 2.2v in turkey.whats most important things on cpu stepping.example:whats ''Y'' on step.
 
The "Y" you talk about does not affect OCing at all as much as AQXEA 0330 VPMW does.

Your week of production is 30, 2003, that's great and stepping you should look up in the FAQ here http://forum.oc-forums.com/vb/showthread.php?s=&threadid=190168


VPMW meaning is
- The first letter is inconclusive.
- All Athlon XP's have a P as their second letter.
- Those with lower third letters consistently do better than those with higher ones, this is considered to indicate wafer integrity.
- Every AMD ever ends in a W.


You have nothing to worry about as far as the CPU is concerned.

Thermaltake Volcano 11 is adequate but Thermalright will usually help you get more out of a CPU. 300W aopen is on the lower side of adequate.
 
Last edited:
i dont buy the lower letter thing... i have a TPBW 0328 AQXEA barton that needs 1.85v to do 2200mhz... cooling is slk800a w/ as 3 and 50cfm and temps are like 48C at 1.85v... it wont pass prime at anything lower
 
Its all luck of the draw. However, it is interesting for a TPBW to do that low. Its something about the AQXEA's that I can't quite put my finger on. Some AQXCA with seemingly worse steppings do a lot better.
 
Back