Aaarrgg im going crazy i can't find info how to unlock duron

[Cyrex]

I Am searching several days for info on how to unlock my duron 650 but nothing usefull im going crazy (im at the point that i want to take my comp and load it in my car drive and drive as hard as i can then play game and voila it runs *faster*) i cant find nothing on this site please someone help me i wil post my results back (what should i do to which pins)

Cyrex

[psx2doctor]

http://www.tweakhardware.com/guide/duron-pencil/

[Cyrex]

MSI kt7 pro2a board / Duron 650 proc / 192 mb / MSI TNT2 m64 video
highest fsb is 107 so i have to change multiplier because 680mhz isn't enough for me i need more more

Cyrex

[Cyrex]

so i only have to take a soft pencil and scrape over the connections
thanx man im going to try i will post the result

[!-=sky=-!]

i think any pencil will work.......lead(mechanical) pencil tends to work better b/c it has thin lead.....if u have 0.3mm ones, they are even better but it's too easy to miss

[Cyrex]

Ahhh yes i feel it i feel the power underneath me
yes Thanx fox Duron 650Mhz 8x104 @ 832Mhz
It works well but for how long? and can i solder the connections?

(if i go further than 8x104 than unstable e.g. 8.5x100
unstable 9x100 no boot!?)

Cyrex

[Cyrex]

Msi k7t Pro2-A Duron 650 / 8x104= 832Mhz
192 Meg King Ram
Msi TNT2 M64 Pro 32 Meg
10 Gigabyte Seagate Disk
Sony ReWriter 8x/4x/32x
Aopen Cdrom 48x
Dynalink 56k Modem
Cheap Ethernet 10m/bis Card
Tekram SCSi Controller --> Scanner
USB Microsoft Optic Scroll Mouse (Without Balls)

Does anyone has problems with one of the same devices above post here i can't get past 850Mhz

Cyrex

[Da Whip]

Try upping the voltage a tad. I am not familar w/ your board, but it works for others. According to a couple of articles on your board, increasing the Vcore to 1.85 helped acheive a stabler O/C.