overclocking question..

I don't know where to post this, as it is a more general o/c question..

I want to get my cpu to run at 166x11 with my 133mhz crucial ram.. I heard that ram can be o/ced to that with not much of a problem, especially crucial.. I don't wanna unlock the multipliers on my chip, so this is the only way to overclock, and i don't like to overclock/underclock my agp/pci bus..

How do I setup my bios so that the memory runs 1:1 with the fsb? and what timings should I be using to ensure stability at 166mhz fsb/memory frequency??

thanx

eventually i'll be upgrading my mem and chip, but not quite yet, i might as well try to do what I can with my setup as it is.

See my sig. PC2100 Crucial cannot do low 160 FSB.
Mine can't do over 152 FSB.

Memory frequency set to 100% is 1:1 on my mobo.

You need PC2700 to do between 166 and 180ish FSB on average.


_____________________
2100+ AIUHB 0248
256MB Crucial PC2100 + 2x 256MB Kingston (Hynix chip) PC2100 @ 6 3 3 2
[152] FSB x 15 = 2280 MHz @ 1.8 Vcore with memory frequency at 100% [152] @ 2.77 Vdimm
37(min) C to 46(max) C Winter ; 42(min) C to 50(max) C Summer
Epox 8RDA+
Thermalright SK-7 with variable speed 80x25mm YS-Tech FD1281259B-2F
BFG GeForce4 Ti4200 8X 128MB; Antec SX-835II case ; 350W Antec SmartPower SL350
Five 80x25mm Ultra Quiet 18CFM Case Fans (NMB C3110KL-04W-B19)