HELP PLZ with a p4 2.4

[MusiCKid]

i have a SY-P4x400 dragon ultra platinum and a p4 2.4 northwood....i dont know wat 2.4c means but i saw lots of people type it....i have 512 ddr and i have my cpu at 1.6 volts....i can only get it up to 2.6 but i have a good heatsink...50 dollars and my fan is 80 mm and spinnning at 2500rpm...plz IM me on armaninja or leave help on the forum ....thank u so much

[Sn0rKy]

50 dollars doesnt mean much...

[Jarlax]

Lots of holes in the information that you provided. First lets start with your CPU. You said it is a 2.4, but is that a 2.4a, 2.4b, or a 2.4c? The difference is in the cpu versions is for the most part the front side bus speed. The 2.4A has a 400 bus, 2.4B has a 533 bus, and the 2.4C has a 800 bus. Which chip you have will make a difference in how far you can overclock.

I am guessing that since your m/b is a SY-P4x400 dragon ultra platinum then you probably have the 2.4a cpu which will not overclock like the b or c.

Next question I have is what heatsink do you have specifically? Saying $50 does not mean anything except you either have a heck of a fan on there or you overpaid ;)

Last question is what kind of memory are you using? Is it in one slot or two?

Without more info we really cannot help much.

[MusiCKid]

i have a 533 fsb and my memory takes up one slot...the fan is 90*90*25mm 12v 2850rpm and the heatsink is http://thermalright.com/slk900.html is ther anything else u need