- Joined
- Mar 17, 2002
- Location
- Cambridge, UK
I've got a P4P800 (non deluxe) with a P4 2.4C cpu. I can run at 3.2ghz (12x266MHz) at stock cpu volts but cannot get any further. My ram (2x samsung 2700 512mb) will run at 5:4 (212mhz) and i've tried using the 2:3 ratio to make sure the ram is not holding it back.
The only bios settings i have changed is the fsb (also tried upping the cpu voltage but this didn't help). Are there any settings in the bios to help me squeeze a few extra mhz out of the board? I am using the 1009 bios, would changing to 1008 help?
Also the northbridge heatsink gets very hot (hotter than the cpu heatsink) so will adding a fan to it make any difference?
Thanks
The only bios settings i have changed is the fsb (also tried upping the cpu voltage but this didn't help). Are there any settings in the bios to help me squeeze a few extra mhz out of the board? I am using the 1009 bios, would changing to 1008 help?
Also the northbridge heatsink gets very hot (hotter than the cpu heatsink) so will adding a fan to it make any difference?
Thanks