a7v133 & duron 750 help

[hurley]

I have my duron 750 runnin at 980 (7x140). Does anyone have anytips to get the extra 20mhz? If i increase my core voltage above normal(1.6v) it doesnt want to boot, My temps are 36 idle and 41 full load.



Duron750 @980 (7x140)
Asus a7v133 w/atric silver II
128 megs crucial pc133 cas2
250 watt PS
globalwin wbk-38(just getting used to the damn noise)
Tnt2 32megs

[el]

If I don't play UT tonight I am going to close those L7's and see if that helps it make it over the hump at boot up7.5x133. I can set my voltage to 1.94(in the bios not default) but that seems a little high. Anybody do this successfully?

[FRANK]

I think that you may have to be a little bit more conservative with the FSB. See what you can get with the FSB at 133MHz. See what the highest speed you can reach is and then compare the test results to see where your machine actually performs better.

[!-=sky=-!]

hmmmm..........
y not try increasing multiplier?
i got 969 with a7v and 750 duron

9.5x101

[fog]

up the voltage,
if bios no go
try doing it with jumpers,
mine wont go with bios,

[Squid]

I run at 1.94 stable for my A900 so you can easily go higher, you will have to do it through the jumpers but.

[hurley]

what is the difference between using the bios for voltage settings and using jumpers?

[hurley]

thankx for the jumper info!!!!! It works!!!!!!!!!!!!!!!! now i have it stable at 1ghz (7x143) and thats only at 1.75 volts. once again thanx for the help!!