i got my 1 gig AXIA chip to 1428 w/ aircoolin ! (pep66)

[moleman]

i know that all you real ][ardcore overclockers are sayin that this is nothin compare to ur $#@#, but for me this is the ultimate high! man.... first i couldn't get the multiplier to change, but redid the pencil chick for the third time and BOOM.... i gotz a p4 contender! weee. i also got my voodoo 5 @ 192 to do 5455 in 3dmark2000. i got it 100% stable and man i feel good. so i just would like to show all my happiness!

[Slake]

Not much??!? Man that sounds fantastic to me. Congratulations. Please give us details on cooling and how you did it. Nice Work! :-D

[moleman]

well lets see.... for cooling i'm runnin a alpha pep66 w/ the copper bottom that stucked out, but i grinded it to be almost perfectly flat. i lapped my heatsink with a 1500 grit sand paper. i don't even have my delta fan connected to it, but remains cool with the 23 cfm quit fan on it. i bet i could get more mhz if i slapped the delta fan on. epox kt133a board w/o raid, 256 pc133 micron mem, voodoo 5 @ 192 and the agp voltage doesn't seem to matter with this card. the mem is runnin at 3.5 volts. i bet i could push the fsb more if it wasn't for my nic. my ratio is 10.5 x 136 @ 1.89 v. um..... maxtor 30 gig, 8x4x32 acer cd-rw, 12x dvd (no name brand, but plays movies fine)

i got a water coolin rig ready but still fixin a leak problem. i'm using a heater core for a radiator and my connectors are leaking during 48 hrs tests.

this cpu cost me $141, and it rplace my duron 700@ 978.

[wildfrogman]

hey, just saw this as i was searching the threads. That is a good overclock with that heatsink/fan of yours for sure. I have worked with tbirds and they sure tend to get toasty while overclocking. When you get your watercooling tell us your max OC on this tbird, powersupply is important also especially with these tbirds above 1.5ghz also. Anyways good luck.