- Joined
- Jun 19, 2001
- Location
- St. John's NL, Canada
I had an old Palmano and it wouldent overclock for crap so here's the new system. Barton 2500 @2.2ghz with a core of 1.74( My GA 7N400 Pro2 wont let it go lower) F3 Bios. I have 11x 200 with temps of 56 Load. I think the gigabyte boards temps are off by a little because even at default speed it was only 2 degrees lower. I only have 2x 512 sticks of generic pc3200 but it runs at 400fsb. I'm using a Volcano 11+ for cooling and 4 case fans. I am impressed with this barton 2500+ its a great cpu. I dont knwo what the stepping is and it was not very much fun trying to put that Volcano 11+ on this board the capisators are too dam close to the socket so I had to be carefull and it took a like 15 min of cursing to get it on. So I wouldent recomend this board to an hardcore overclocker, but I like the features such as serial RAID which I'm gona try that out and pick up 2 WD Raptors and try that out in Raid 0
Barton 2500+ @2.2 (11x200) 1.74 Core @56 Load temp
GA-7N400 Pro 2 (F3 Bios)
2x 512mb Generic DDR 400 (Cheep and works @400fsb and dual chan mode which is all I needed)
Antec case w 4 Fans & 450watt psu
WD 120gig SE + 40 gig maxtor diamond plus
Asus Geforce 4-TI4800se @300/600
Barton 2500+ @2.2 (11x200) 1.74 Core @56 Load temp
GA-7N400 Pro 2 (F3 Bios)
2x 512mb Generic DDR 400 (Cheep and works @400fsb and dual chan mode which is all I needed)
Antec case w 4 Fans & 450watt psu
WD 120gig SE + 40 gig maxtor diamond plus
Asus Geforce 4-TI4800se @300/600