NF7 Rev. 2.0 Problems

S

Sk8erfreak986

Member

​

Joined

Aug 23, 2003

Location

New Jersey

• Sep 17, 2003

• #1

Alright just re-built my new system (already rma'ed one NF7 for the same problem)
Specs:
Geil 512MB (2*256) PC 3200 in slots 1 and 3
amd 1700+ (DLTC3)
Abit nf7(obviously)
Radeon 9500 Pro
SB Live 5.1
SLK-900 with 92mm fan

Alright set the whole thing up check for shorts and i get No video post and no beeps whatsoever. I have rebuilt this and tested known good video and processors. I had the same issue with my last board so i figured the AGP was dead...any ideas what might be wrong or what i might have done...

 

bluestreakLB

Disabled

Joined

Sep 6, 2003

• Sep 17, 2003

• #2

Did you try new ram or ram in another system?

 

Deathknight

Member

​

Joined

Sep 8, 2002

Location

Chicago

• Sep 17, 2003

• #3

Yeah try different memory, or verify that memory in a different machine

 

newindy4130

Registered

​

Joined

Jul 6, 2003

Location

indianapolis

• Sep 18, 2003

• #4

hi, dont take this wrong, but why so much problem with the NF7, i have not one problem with my kd7-g at all.........

 

K

Kendle666

Member

​

Joined

Dec 12, 2001

• Sep 18, 2003

• #5

Hey bud..........start with only the MoBo 1 stick of mem and the video card .........and then work from there.........also I would try another video card just to get the system up and runnin.

 

JaY_III

Senior of BX

​

Joined

Dec 17, 2000

• Sep 23, 2003

• #6

i am having a simular problem getting mine to power on aswell.
it goes on sometimes... once i get it started no problem... but if i OC to high and cant post, its hard to get it started again.

DDR33/PC2700 test ram
ati 9800np
barton 2500+

doing some tests to find out what the deal is

DDR250/PC4000 is my other stick
variuos PCI/AGP cards to test.
Only have the Barton (primarly an intel may)

Any info i find out i will share.
think it has todo with primary display being PCI and not AGP as BIOS default

 

wannaoc

Member

​

Joined

May 6, 2003

Location

Buried in UPS packages

• Sep 23, 2003

• #7

Is,'t slot 1 and 3 not duel? You might try and do just one like stated above.

 

JaY_III

Senior of BX

​

Joined

Dec 17, 2000

• Sep 23, 2003

• #8

problem i mentioned, cant power up after overclock...
BIOS 18 fixes that.
But i still say the board is a little hard to post the 1st time

 

james.miller

Member

​

Joined

Jun 8, 2002

Location

Dunstable, uk

• Sep 23, 2003

• #9

could be the psu. what are you using?