3DMark2001 Oc'ed Scores?

[tweaker]

If U have a minute, Please answer the following for us.

Make and Model of your Vid Card?
How is it Modded?
What was your best score? At what Proc Speed?
How is your rig cooled?

:D

Thank You for your response in advance.

Our 3DMark2001 score is 21024 as a new high at 2.4ghz
and 3DMark03 score of 6985
See sig for details and if you want to see our 9800np card as it turned into Frankenstein, See Below.

http://www.pbase.com/tweaker/inbox

:eek:

[Turd Furguson]

Ridiculous ~~~ ~~~~

[Mustanley]

19,491 with 9800np listed in the sig. Cpu was running at 207x12=2484MHz. I've got my cpu up to 214x12 now, so it's time to test again.
Hopefully I'll have some copper ramsinks for the 9800np this weekend to match the copper 1u cooler I installed (same hsf chopped up into ramsinks).
Then comes the pelted MCW50-T

[El<(')>Maxi]

Hey Mustanley, have you tried lowering your multi say to 11 or 10.5 even. A higher FSB will pick up some point's for you, it look's like your RAM can handle it. And if you have not tried the CAT 3.5's in your testing, I would recommend it.

I'm getting a MCW50-T also:p

I have one other cool trick for you to pick up point's. Need to have WINXP, or 2000 will work with a bit more effort.

Maxi

[ju`w0nx]

I just recently scored 19910 with my hardware (see sig).

-R9700Pro with 2.2kohm resistor at ~1.8vcore - Dynatron 1U copper cooler
-Barton 2500+ 222x10.5 for benchmarking - Tt Volcano 7+

Temps are reasonable. Tweaker, how did you achieve 233fsb? Did you do a northbridge voltage mod?, also, point me to a good memory vmod. With the extra fsb, I could put myself over the 20k mark.

[kc428]

-Visiontek 9800 pro @ 449 MHz / 386 MHz
-Thermaltake Giant II
-21067, 2.6C @ 3.3
-Watercooled CPU and aircooled vid.

[q149]

PoworColor 9700 Pro /w all 4 Vmods @ 447/804

22,376 (http://service.futuremark.com/compare?2k1=6972591 )

[Bobtod]

Sapphire 9800pro 128mb with Asetek WaterChill + large homebrew heatsinks - NO vmods yet
21,661pts @ 495/818 (major artifacts;))
3410mhz was with water (New Vapochill armed and ready)

Can't touch q149 with his 9700pro and uber memory! Very nice score my friend :clap:

[Bobtod]

damn, double post!

[takiwa]

If U have a minute, Please answer the following for us.

Make and Model of your Vid Card?
How is it Modded?
What was your best score? At what Proc Speed?
How is your rig cooled?


All that information can be found on the OC3DMark team website...HERE (http://oc3dmark.octeams.com)

[Mac]

Originally posted by Bobtod
21,661pts @ 495/818 (major artifacts;))


I cant stand to run a benchmark with major artifacts.. just seems like cheating to me..

[tweaker]

Originally posted by ju`w0nx
I just recently scored 19910 with my hardware (see sig).

-R9700Pro with 2.2kohm resistor at ~1.8vcore - Dynatron 1U copper cooler
-Barton 2500+ 222x10.5 for benchmarking - Tt Volcano 7+

Temps are reasonable. Tweaker, how did you achieve 233fsb? Did you do a northbridge voltage mod?, also, point me to a good memory vmod. With the extra fsb, I could put myself over the 20k mark.

233fsb is with no voltmod to northbridge yet,but im doing it tonight.the goal for tweaker and i 250fsb.not sure if we can do it but what the h***.at the moment im working on a 9000pro(128)extreme voltmods to all andwater cooled +ramsinks.my buddy seen ours and was hooked...lol.ill keep ya posted..

later radman

[USAPGAPRO]

13,234 No OC on card. Everything in sig.

[Arkaine23]

Why don't you scope out OC3dmark's database on our teams' page???? All of the info you asked for is in there, for our whole team.

http://oc3dmark.octeams.com/

[Dichael]

i make 14256 no OC on my card.

[Mattman]

I was feeling pretty good about 14,850 @ 1024*768*32 that I hit today, until I started reading your scores. Back to the drawing board...

Oh yeah, 4800+ on 3dMark2003 :(

[Edward2]

Mattman, don't feel too bad because your score is being hurt a lot by your low CPU speed and FSB speed. Some of the tests within 3dmark01 are highly dependent on your CPU/FSB speed.

[ZachM]

Well, I'm the lame one here with a score of 13,151.

I'm using stock cooling on the vid card, no RAM sinks, and a Volcano 11 on the processor. I could probably squeeze a bit more out of the vid card, but I'm waiting for winter when the house is a bit cooler.

[Wolfgang]

9800 no mods stock cooling 460/370
240x10.5 nf7 vdimm mod
barton cooled my 226 watt tech
21001 3d01 link below

[shiltz]

EVGA Geforce FX 5900 ultra @560/964 44.03 driver (flashed to reference bios, no V mod)
P4 3.0C @ 3675 MHz (15 x 245)
score: 20914
CPU and GPU water cooled

[nimrod0031]

I just ran it the other night and got this

23,160
ati 9800pro 518/378 (novmods)
p4 @ 3.79ghz
watercooled

[Bobtod]

Originally posted by nimrod0031
I just ran it the other night and got this

23,160
ati 9800pro 518/378 (novmods)
p4 @ 3.79ghz
watercooled

Nice score nimrod ;)
have you got a TEC on that GPU to reach 518? Mine has started getting checker boarding after 470-475mhz but I can bench up to 500 without crashing. Does anyone know if a GPU vmod will cure my checker boarding?

quick test with new vapo = 22,163
2.6C @ 3.75 - Vapo XE
Sapphire 9800pro 452/389 - Air - Yet to fit WC into Vapo Case

BT

[tweaker]

Originally posted by Bobtod


Nice score nimrod ;)
have you got a TEC on that GPU to reach 518? Mine has started getting checker boarding after 470-475mhz but I can bench up to 500 without crashing. Does anyone know if a GPU vmod will cure my checker boarding?

quick test with new vapo = 22,163
2.6C @ 3.75 - Vapo XE
Sapphire 9800pro 452/389 - Air - Yet to fit WC into Vapo Case

BT

yes it should help with the voltmod(i can run 500 with no checkers,if succesful u should gain around 500 pts..
The core voltage to the gpu is 1.90 hope this helps..

later radman
:cool:

[Mac]

just as a precaution, id make sure you have enough money to buy another card just in case something goes wrong.

[Mac]

Originally posted by nimrod0031
I just ran it the other night and got this

23,160
ati 9800pro 518/378 (novmods)
p4 @ 3.79ghz
watercooled

damn just regular water on the gpu?

thats a really high overclock for just water..

[shiyan]

hmmm... gotta wait till I get my 9800 Pro.

even then I don't think I'll be getting close to 20k....

my crowning achievement in the past:

10649 on 2002-02-03

AGOGA week 50 XP2000+ @ 11.5x161, 1.85v, Alpha PAL8045, 8500 Retail @ 330/330, 1.95v/3.86v, Icicle 1U, Tweakmonster, Crucial PC2100 Cas 2.5, fastest timings, 2.85v, Tt heat spreaders, Abit KR7A-Raid no voltmods.

http://service.madonion.com/servlet/Index?pageid=/orb/projectcompare&projectType=6&projectId=2629399

and what the 1st page looked like back in Feb 2002:
http://www.student.kuleuven.ac.be/~m0324684/

[tweaker]

Originally posted by shiyan
hmmm... gotta wait till I get my 9800 Pro.

even then I don't think I'll be getting close to 20k....

my crowning achievement in the past:

10649 on 2002-02-03

AGOGA week 50 XP2000+ @ 11.5x161, 1.85v, Alpha PAL8045, 8500 Retail @ 330/330, 1.95v/3.86v, Icicle 1U, Tweakmonster, Crucial PC2100 Cas 2.5, fastest timings, 2.85v, Tt heat spreaders, Abit KR7A-Raid no voltmods.

http://service.madonion.com/servlet/Index?pageid=/orb/projectcompare&projectType=6&projectId=2629399

and what the 1st page looked like back in Feb 2002:
http://www.student.kuleuven.ac.be/~m0324684/


seems to me all you need is update a few things,if you need some help let me know...

later radamn

[shiyan]

I guess what I need is to get the AMD mounting hardware for my Prommy, set that up on my 2400+ and NF7-S, then I might be able to break 20k...

thanks for the offer! I now know who to go to if I need voltmodding info for the 9800!

[Bobtod]

Originally posted by tweaker


yes it should help with the voltmod(i can run 500 with no checkers,if succesful u should gain around 500 pts..
The core voltage to the gpu is 1.90 hope this helps..

later radman
:cool:

Cheers Radman, i'm going to try the mem vmod for my P4P800 first and see how that goes, then when I feel brave i'll do the radeon.

Originally posted by Mac
just as a precaution, id make sure you have enough money to buy another card just in case something goes wrong.

I don't think anyone can 'afford' to fry a 9800pro, but if it does happen then I guess i'll somehow manage to find the money for an 9800XT ;) I guess this is the gamble we all take when pushing technology to the edge.

BT

[Benssax]

Damn my score seems pretty good for a Ti4200

XP2600 Barton at 11X213 or 2.34ghz
512mb PC3500 kingmax 4-3-3-2.5
Visiontek Ti4200 315/560
Shuttle AN35N-Ultra

14,405:)

[nimrod0031]

I have an 80w tec on the gpu but the cpu is just on plain water. I'm thinkin I could nail around 540 core with a vmod and maybe 400 mem with a vmem mod givin me well over 24k. Only problem is I cant afford to get a new gpu right now.

[Mac]

Originally posted by nimrod0031
I have an 80w tec on the gpu but the cpu is just on plain water. I'm thinkin I could nail around 540 core with a vmod and maybe 400 mem with a vmem mod givin me well over 24k. Only problem is I cant afford to get a new gpu right now.

do you have an mcw50t or a maze4-1??
thats a good overclock.. only got mine to 475 with an 80w tec.

although i only had 1 80cfm fan cooling the dtek procore. just added another fan and hopefully i can push it a little futher, probably not though.

[nimrod0031]

I had to put another rad in my loop to get good temps. I have 2 1976 chevette heatercores with OTIS shrouds and 2 120m fans

I have the swifty with the pelt. I have benched it at 524 but it wont do all the tests at that speed.

[dontplay]

im only getting around 9000 from the system in my sig. This seems a bit low doesnt it? Btw the card is a regular 5600 not an ultra

[shiyan]

hmm... top scores are under 13000 with 2.2Ghz, but with the card at 414/710.

hope that helps.

[xoke]

Bump for sweet old school hardware scores. :D

[ChanceCoats123]

What happened to your name Xokeman?!?!?!

[xoke]

What happened to your name Xokeman?!?!?!


I was bad an I.M.O.G. took half, lol. j/k :D

[ChanceCoats123]

Most oftenly, people get canned when bad. :rofl: :p

[dejo]

holy undead thread!

[xoke]

holy undead thread!

Yea...I been digging waaaaaaaaaaaaaaay back. Looking at how some of the conversations went back in the day. Don't know where your going till you know where ya been right?

[ChanceCoats123]

Yea...I been digging waaaaaaaaaaaaaaay back. Looking at how some of the conversations went back in the day. Don't know where your going till you know where ya been right?

This is old enough that Amd was beating intel. :sly:


:bday:

[m0r7if3r]

This is old enough that Amd was beating intel. :sly:


:bday:

wait, that actually HAPPENED?! I thought that people were kidding when they talked about that ;)

[KonaKona]

wait, that actually HAPPENED?! I thought that people were kidding when they talked about that ;)

At the time intel was fooling around with the whole netburst architecture (P4, that pentium with two P4 cores stuck on it) that was fast for clocks but didn't do much with them. IIRC the intel benchers would be running pentium Ms to compete with the big boys on AMD at the time, with their fancy 'FX' chips and such. At the time the highest clocked AMD and PM chips were in the 3ghz range (on phase!) while the netburst chips were somewhere between 4-6ghz depending on which one it was.

Ol' G can fill you in with more details, think I stole the story from him. :)

[m0r7if3r]

lol, i was joking (that was why there was a ;))

[KonaKona]

Hey, that's history right there son!

[NiTrOwow]

Damn my score seems pretty good for a Ti4200

XP2600 Barton at 11X213 or 2.34ghz
512mb PC3500 kingmax 4-3-3-2.5
Visiontek Ti4200 315/560
Shuttle AN35N-Ultra

14,405:)

haha :) :thup: