Duron850 - No go with o/c???

[Crow]

Any1 help this virgin o/cer.
Just about squeeze 893(105*8.5) but thats it. Tried the L1bridges thing a few times, no luck. Any1 tell me what the rest of 'em r 4? should i bridge 'em all?
Any help would b ace.

Abit-KT7A-raid (D850@893 - poor!!) cpu no.AMCA0051
Thermosonic V60-4210
256 micron PC133 (2-2-2)
Hercules 64MB GF2 mx
IBM 'Erricson' 40Ghdd

[BboySkid]

hey im pretty new at this too but im pretty sure you shuold only connect the L1 bridges, because they are what lock/unlock the multiplier settings

the other bridges if connected could probably screw something up and wouldnt help you out that much

and what are your case temps and such

another key thing could be your voltage...

anyway i hope by bumping this message you'll get some more experienced responses

[UnseenMenace]

The L1 bridges unlock the multiplier, check out this URL for more info
http://www.tweakhardware.com/guide/duron-pencil/

The L7 Bridges control the voltage of the CPU, check out this URL for more info
http://www.tweakhardware.com/guide/duron-voltage/
-------------------------------------------------
Duron 800 @ 1050 with Global Win FOP-32 (140 x 7.5)
Abit KT7A-Raid Mobo
512 mb (133 mhz Crucial Stuff CAS 2)
Hard Drive Cooler
Elsa Eraser X2 Gforce with Blue Orb (modified to display as a Quadro and overclocked http://www.tweakhardware.com/guide/quadro/ )
Sound Blaster Live Value
Full Tower with 5 (120 mm) case fans with seperate PSU

[dozier768]

im running my duron 900 at 1gig at 1.6 volts. i had zero luck bumping the fsb so i jest briged the L1's and changed the multiplier. btw dont use a pencil to do it. use a circut repair pen and a needle works better last longer less resistance. good luck