- Joined
- Jun 19, 2001
- Location
- St. John's NL, Canada
I just picked up a barton 2500+ with an GA 7N400 Pro 2 board and 2 512 sticks of generic ddr 400. I'm running at 2.2 ghz with 400fsb 11x200 right now. As I'm writing this I'm about to go to bed and I have prime 95 running, I hope it lasts overnight. I'm using a Volcano 11+ and I have load temps right now of 56-57 while running prime 95. I usually have an idle temp of 49-51. I'm at 1.74 Volts and running stable for about 4 days now so I decided to give prime 95 a go. its the first time I've tried prime 95 and I'm wondering how good is it. If it passes 12 hours would that be considered 100% stable? I know this gigabyte board dont overclock the best but I believe I've reached my goal I bout this board mostly for features and some minor overclocking.
Barton [email protected] 1.74 volts (Volcano 11+) hsf
2 512 sticks of generic ddr 400
450watt psu with 4 case fans (antec case)
all below voltages are at 100% CPU load so are these good?
3.3 line is at 3.2
5.0 volt is at 5.020
12 ivolt is at 11.79
Asus Geforce 4 Ti4800se @300/600
Wd 120gig 8mb cache + 40 gig maxtor
Barton [email protected] 1.74 volts (Volcano 11+) hsf
2 512 sticks of generic ddr 400
450watt psu with 4 case fans (antec case)
all below voltages are at 100% CPU load so are these good?
3.3 line is at 3.2
5.0 volt is at 5.020
12 ivolt is at 11.79
Asus Geforce 4 Ti4800se @300/600
Wd 120gig 8mb cache + 40 gig maxtor