PDA

View Full Version : Hyperx PC-3000, Impressive!


Podtec
09-23-03, 06:43 AM
Well, after doing a lot of searching for the holy grail of memory , and reading what others are using , i decided to try this memory. I have tried many sticks of PC 4000, 3700, 3500, 3200, and none of them did with these sticks do. Throwing them in my Abit IS7 i raised voltage to 3.15 set the timing to 5:4@ 2,5,2,2, and cranked the fsb to 292MHZ, posted. Fired up WinXP, and to my surprise no bsod, ran memtest for over an hour , no crash, ran torture tests for two hours , no crash, cranked the fsb to 295MHZ ran memtest for over an hour, two errors , torture test still made it - for many hours. I'd say, Impressive! .

Abit Is7 vr vmod
P4 2.4C Costa 017 3504mhz.

Hyperx 2x256 pc3000, not dual
purchased at Googlegear $61.00pc
Hyperx Prod # 9905200.A00
1147231-2.5v

Suma
09-23-03, 07:15 AM
nice man..
how about some sandra mem benchs?

Celemine1Gig
09-23-03, 08:08 AM
I'd say: "A BIG thx to the good old Winbond BH-6 chips!!!":D

Anyway, great work man!;) :)

YviE
09-23-03, 08:31 AM
Great memory overclock. I wanna see some benches too . :)

YviE

Podtec
09-23-03, 02:14 PM
http://home.twcny.rr.com/podtec/pod.jpg

q149
09-23-03, 02:35 PM
I also have some HyperX 3000 in an IS7. They are BH-5

http://q149.netfirms.com/cgi-bin/mba1.cgi

madsam
09-23-03, 02:49 PM
i have that ram, but i can't get those scores on this kt400 chipset.

nice mem scores guys....;)

Podtec
09-23-03, 03:09 PM
looks good . the different between 294 and 309 is a good Bump

q149
09-23-03, 04:22 PM
Actually that is 313, i am also using some GAT though

Luihed
09-23-03, 08:31 PM
Here's my khx3200, I think its got bh-5 in there too....
http://www3.telus.net/luis99/7k

http://www3.telus.net/luis99/251

ConquereR
09-23-03, 09:26 PM
Originally posted by Luihed
Here's my khx3200, I think its got bh-5 in there too....
http://www3.telus.net/luis99/7k

http://www3.telus.net/luis99/251

Thats THIS (http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=80097-22) right?

trex
09-23-03, 09:47 PM
Originally posted by Podtec
Well, after doing a lot of searching for the holy grail of memory , and reading what others are using , i decided to try this memory. I have tried many sticks of PC 4000, 3700, 3500, 3200, and none of them did with these sticks do. Throwing them in my Abit IS7 i raised voltage to 3.15 set the timing to 5:4@ 2,5,2,2, and cranked the fsb to 292MHZ, posted. Fired up WinXP, and to my surprise no bsod, ran memtest for over an hour , no crash, ran torture tests for two hours , no crash, cranked the fsb to 295MHZ ran memtest for over an hour, two errors , torture test still made it - for many hours. I'd say, Impressive! .

Abit Is7 vr vmod
P4 2.4C Costa 017 3504mhz.

Hyperx 2x256 pc3000, not dual
purchased at Googlegear $61.00pc
Hyperx Prod # 9905200.A00
1147231-2.5v
what is the highest speed u can go at 2.8 V?

trex
09-23-03, 10:09 PM
Originally posted by Luihed
Here's my khx3200, I think its got bh-5 in there too....
http://www3.telus.net/luis99/7k

http://www3.telus.net/luis99/251
what volt r u running it at?

Luihed
09-23-03, 10:18 PM
Originally posted by ConquereR


Thats THIS (http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=80097-22) right?

Yes, mine is the single 256mb version though.... avoid the ones with the "A" after the speed ie khx3200A.... that bench was at 3.36v....

trex
09-23-03, 10:25 PM
Originally posted by Luihed


Yes, mine is the single 256mb version though.... avoid the ones with the "A" after the speed ie khx3200A.... that bench was at 3.36v....
is ur 256 double sided or single?
cause i look at googlear.com that ram is double sided

Luihed
09-23-03, 11:05 PM
I have no idea.... i didnt know they came in both forms.... how can you tell if it is or isnt?