axia code

[peewee]

i finally got my new chip today
heres the code on it:
A1330AMS3C
AXIA0119DPEW
does this mean anything good or bad??

[Aman99]

It means your chip was made in the 19th week of the year 2001. and since its an AXIA code it should overclock well.

Aaron

[TT120]

Hey, thats my chip, I uhhh, dropped it, yeah, thats what I did, I dropped it.
:):):)
Just kidding. That chip should O/C very well.

[peewee]

TT120 (Jun 03, 2001 12:49 a.m.):
Hey, thats my chip, I uhhh, dropped it, yeah, thats what I did, I dropped it.
:):):)
Just kidding. That chip should O/C very well.

well i cant get past 1.37 with this new chip!!! i get windows errors and blue screens!!! i hope i dont have a dud!!
my old one was over 1500, i didint change any setting so the new one should have been fine, but it aint!!!!
anyone have any good ideas??

[SleepyKat]

peewee (Jun 03, 2001 12:09 a.m.):
i finally got my new chip today
heres the code on it:
A1330AMS3C
AXIA0119DPEW
does this mean anything good or bad??

1330=1330 MHz
A=Package Type
M=Operation Voltage (1.75V)
S=max temp (95 C)
C=max cpu FSB of 266

nice chip

[TT120]

peewee (Jun 03, 2001 01:03 a.m.):
TT120 (Jun 03, 2001 12:49 a.m.):
Hey, thats my chip, I uhhh, dropped it, yeah, thats what I did, I dropped it.
:):):)
Just kidding. That chip should O/C very well.

well i cant get past 1.37 with this new chip!!! i get windows errors and blue screens!!! i hope i dont have a dud!!
my old one was over 1500, i didint change any setting so the new one should have been fine, but it aint!!!!
anyone have any good ideas??
What are your temps?

[peewee]

What are your temps?[/quote]

i am at 52c idle

[Aya Brea]

Uhh! That's hot...

[Sniper]

That is not really bad for heat, my 1.2 does 50C on idling. Think about getting a better heat sink, like a volcano 2 or better, and the looking up in windows and errors, could be becuase of the motherboard. it has a via chip set doesn't it... If so go to abits site and download the new bios or go to www.viahardware.com and try some new via 4 in 1's. That may be the problem. and if u have win2k and u haven't reinstalled since u got it then u may need to becuase of the clock setting when windows was install. It can't handle it all the time. This may or may not be the problem, but if i were u i would try it.

[peewee]

[well i cant get past 1.37 with this new chip!!! i get windows errors and blue screens!!! i hope i dont have a dud!!
my old one was over 1500, i didint change any setting so the new one should have been fine, but it aint!!!!
anyone have any good ideas??[/quote]

UPDATE.. i got it to overclock and got the temps down to 48idle at 1500mhz stable, is that better??

[peewee]

peewee (Jun 03, 2001 02:21 p.m.):
[well i cant get past 1.37 with this new chip!!! i get windows errors and blue screens!!! i hope i dont have a dud!!
my old one was over 1500, i didint change any setting so the new one should have been fine, but it aint!!!!
anyone have any good ideas??

UPDATE.. i got it to overclock and got the temps down to 48idle at 1500mhz stable, is that better?? how do i capute a screen shot in sisoft sanda???
[/quote]

[TT120]

That sounds much better. IMHO 52c idle is too hot. These chips get real sensitive to heat when you push them. If you want to run at that speed stable for any length of time you'll havta do something about the temps.

[peewee]

TT120 (Jun 04, 2001 09:05 a.m.):
That sounds much better. IMHO 52c idle is too hot. These chips get real sensitive to heat when you push them. If you want to run at that speed stable for any length of time you'll havta do something about the temps.

well im at 42-45c idle at 1500mhz now , is that better??
i think this motherboard is giving the wrong temps cauz when i had my heatsink i was at 58-60 idle, so im guessing this temp monitor is bad.. or incorrect