Newegg retail 1800+'s

[Arkaine23]

While there is no guaruntee, I have seen amny JIUXB DLT3C chips and many NIUHB DUT3c chips if you order retail 1800+ from newegg.com.... I have seen thme in this forum and on other forums too.

[Mizzery]

yeah, i wish i had read your thread on the oem ones before i ordered one and got a 0325 KIUHB in the mail today (good thing its not for me :)). I got a newer stepping than this on my 2500 barton (0327) that i ordered retail from them a month and a half ago.

[v8vega350]

i just got a niuhb 0334 from newegg it will do about 2450 with 1.9v not all that much better then my 1700+ 0319 but on to burning in

[brennan77]

I bet the KIUHB would do well. Hmmmm, we'll never know.

[c627627]

We've been through this. It's an unacceptable gamble.

If you are in the US, there are only three known places to buy B's without paying a guarantee premium:

1700+ at gameve.com:
http://www.gameve.com/store/gameve_viewitem.asp?idproduct=267

1700+ & 1800+ (That's just the two of those, not higher rated CPUs) at this place:
http://www.zipzoomfly.com/jsp/ProductList.jsp?ThirdCategoryCode=010413
(click on 'next' at the bottom of the page.)

2100+ (that's just the 2100+, not lower CPUs) at newegg.com:
http://www.newegg.com/app/ViewProduct.asp?submit=manufactory&catalog=343&manufactory=1028&DEPA=1&sortby=14&order=1

OEM's (not retail) are guaranteed.

[Mizzery]

Originally posted by brennan77
I bet the KIUHB would do well. Hmmmm, we'll never know.

Arkaine didn't have much luck with his. I'll try mine when i have time tomorrow, but from what arkaine got i don't think it will be able to beat what i have now.

[srwven]

Originally posted by c627627
We've been through this. It's an unacceptable gamble.

If you are in the US, there are only three known places to buy B's without paying a guarantee premium:

1700+ at gameve.com:
http://www.gameve.com/store/gameve_viewitem.asp?idproduct=267

1700+ & 1800+ (That's just the two of those, not higher rated CPUs) at this place:
http://www.zipzoomfly.com/jsp/ProductList.jsp?ThirdCategoryCode=010413
(click on 'next' at the bottom of the page.)

2100+ (that's just the 2100+, not lower CPUs) at newegg.com:
http://www.newegg.com/app/ViewProduct.asp?submit=manufactory&catalog=343&manufactory=1028&DEPA=1&sortby=14&order=1


OEM's (not retail) are guaranteed.

The 1700 at gameve is on backorder, so don't bother.

[Miralcos]

I got a KIUHB from newegg about a week ago and it would get to windows and crash at 2600mhz... took 2.1volts tho, it was oem...
Just recieved a JIUHB Dlt3c retail... My first dlt3c as the others have all been dut3c.
Hope this one doesn't need as much voltage as all the others in the past....

[Hughhefner]

Have received FIVE 1800's retail from Newegg in the past 2 days allhave been 0334 or 0335 NIUHB DLT3C, the FIRST one is up.

1.75V, 2426 with 129F with SLK900A--TTsm2, epox 8rda3+, MBM5 temp.

Have 5 more on the way, LOOK OUT!!!

[cherryp00t]

wowa thats awesome! lol those niuhbs are like owning

[Cutter]

Ordered one from newegg Tuesday night should be here tommorow, I will post my results soon there after:) Hope I get one like Hugh got, LOL

[Arkaine23]

My KIUHB's weren't so bad really. Something is wrong with my test box- probably the hdd....

Everything works fine, except folding hangs on the initial benchmark no matter what I do. I fresh installed win2k twice. And I tried speeds ranging from stock to 2.2Ghz. Same problem. So now I've got that box folding on a Overclockix CD and saving the WU to a directory on my fileserver.

[cherryp00t]

Originally posted by Cutter
Ordered one from newegg Tuesday night should be here tommorow, I will post my results soon there after:) Hope I get one like Hugh got, LOL

thats retail right? from the ppl that have posted it all the chips they brought were retail ones =P gl on your buy =)

[v8vega350]

well after 24 hours of just running the chip it was up to 2650 @1.93v but my comp keeps restarting and it gets worse as i increse the vcore i need a better psu

my 12v line is at 11.55 at 2542 mhz

[Top Hat Theater]

My retail 1800 should be here tomorrow. I'll be sure to let you all know what I get.

/me prays for NIUHB

~THT

[cherryp00t]

hehe everyons jumping on the NIUHB bandwagon ;d gl to all the rollers :)

[Top Hat Theater]

Mine is a NIUHB 0334. Will test it out in a bit.

~THT

[julianba]

I received a niuhb dlt3c 0334 from newegg two days ago :D

[brennan77]

Why do I feel like I need one of these when I have one running at 2400mhz already?! This is so stupid of me. I already upgraded a DUT3C to the DLT3C. Geeze, I need a video card, not a CPU. But I find it hard to stop the urge.

[IdreamofDSl]

I have the exact same feeling. I even had it in cart about to pay and I stopped myself. What’s the point? The best I will get is another 200 MHz. It truly is an addiction, I'm soo ashamed LOL.

It would be nice to run the same speed at lower voltage. Damn it, there I go again. I need to Overclockers Anonymous meetings.:(

[Top Hat Theater]

yeah, me too. Considering my 2100 was doing 2.3GHz, I won't see a difference at 2.6GHz except in benchs. Ah well.

~THT

[ManOfKnight]

what is the average? it sounds like no one in the past couple weeks has received a bad chip. I am sure any chip i receive will blow away my AGOIA 1600

[julianba]

I just installed my 1800+ niuhb 0334 dlt3c from newegg and it's running at 2.3ghz already. Voltage is 1.62 according to mbm5. This is way better than the 1800+ dlt3c 0311 i got from excaliber. That one i topped out just over 2.3 ghz at 1.84 v with the same setup. I have a crap psu though and i don't think i reached the potential of that chip. :beer:

[Miralcos]

Well, I guess as my luck would have it, I seem to be the only person in the last week that ordered a retail 1800 that got something other than NIUHB. Mine is JIUHB 0333 and it will not boot with stock voltage at 1800mhz. I'm burning in now and hopefully tomorrow it will do better..... :)

[julianba]

I think hugh hefner bought them all up, blame him lol :beer:

[Hughhefner]

I'll let you all know in tuesday what the steppings are on the next 5 that I ordered, Leta all pray for that "MIRACLE" stepping like ZIXUB that will do 2700 at stock voltage and amd heatsink,

Now wouldn't that be nice , DREAM ON !!

[v8vega350]

http://www2.freepichosting.com/Images/86109/1.jpg

here is what i can get out of mine. i cant put anymore vcore to it because i start to get reboots

niucb 0334 wpmw dlt3c 1800+ i have been running it crunching seti @ 2614 for about 24 hours now just water no pelt (yet)

[felinusz]

IdreamofDSl - It is true - I am busting my @$$ lookin for one of these NIUHB's in Canada, and I'm at 2500 MHz *already*. The urge to keep going higher and higher is compelling and addictive - but WHY?!? Soon I will be one of those guys who spends all of his money just buying CPUs of all different steppings and weeks - just to see how high each one will go on his phase-change cooling... the guys who even buy the known crappy steppings just to see how high they can get them... the guys who have hundreds of "keychains"... the thought is just sickening. Luckily I don't have phsae change... yet... :(

WHY DO I ALWAYS WANT MORE AND MORE SPEED!?!?!

I really, really, really need help. 8-\

But past that - I am seriously wondering why AMD is putting out so many different new steppings all of a sudden?

Look at what we have here -

1. JIUHB*** (still being produced - I saw more than a few 0334s today while making the rounds of all the computer stores I saw on my way to another computer store 2.5 hours away from my house by bus... 8-\ )

2. JIXHB

3. JIXIB*** (does anyone have results on one of these? I can get six locally and resell them @ no profit, if they are worth the time - 0332)

4. NIUHB

5. KIUHB

EDIT>>> *looks at above post*
EDIT>>> 6. NUICB

Weird huh? Why are all of these new steppings suddenly being put out? You'd think that what with the Athlon64 release AMD would *STOP*, or at least slow down on the production of new steppings... Any thoughts?

[Hughhefner]

IMMEDIATELY GO OUT, er CAMP out and buy ALL the JIXUB's, I repeat buy all the JIXUB's.. Supposed to be the best of the lot from what I've heard.

I've been hunting for those, all the recent xp2600's Ive seen have been AIXUB , so "X" marks the spot

There is a thread in the AMD cpu section on JIXUB stepping, gotta go---CUBS WIN!!!!!!!!!!!!!!!!!!!!!!!

[Miralcos]

felinusz, where are you located and how much are those JIXIB processors?

[felinusz]

I live in Toronto, Ontario - the complete stepping is AXDA 1800 DLT3C JIXIB 0332 XPMW. I posted the store name in the "Where can I find these crazy mad ****znatch processors in Canada?" thread (It isn't named *exactly* that ;)) which is still very alive.

They have around 6 in stock and told me that all their recent shipments have all been JIXIBs. I have seen *NO RESULTS* from this stepping - otherwise I would be overclocking one right now ;). I don't want to be the $83 (Canadian $$$) Guinea pig for this particular stepping ;). The main problem is that it takes me 2.5 hours to get to this store, and 2.5 horus to get back. So - if I am going to go and buy one I will probably buy them all and resell them (what could I do with 6 processors? ;)) for like $0-$10 more than they cost me. But I would raly like to see some results first ;)

They are retail box 1800+ processors with the new (and shiny!) AMD fan. They are *NOT* OEMs. Strangely enough the other 3 computer stores in that same mall only have JIUHBs.

Hughhefner - they are "JIXIB', not "JIXUB ;)

[julianba]

The jixib is possibly a great overclocker there was a thread recently about that exact stepping, supposedly 2.6 ghz on air BUY! BUY! BUY! lol

http://forum.oc-forums.com/vb/showthread.php?s=&threadid=233337



:beer:

[Top Hat Theater]

Bah..burning in actually degraded my overclock. Won't post at 2600 regardless of vcore now.

~THT

[ixnay]

Originally posted by Miralcos
Well, I guess as my luck would have it, I seem to be the only person in the last week that ordered a retail 1800 that got something other than NIUHB. Mine is JIUHB 0333 and it will not boot with stock voltage at 1800mhz. I'm burning in now and hopefully tomorrow it will do better..... :)


What where your results after burn in and what is your exact stepping?

I'm asking becuase I have the same code and I dont have my MB yet so I'd like to know what I can expect.

[Miralcos]

I'm running at 2.5ghz right now at 1.85volts. All I can remember from the stepping is it's JIUHB DLT3C and the week is 0333. It's stable as a rock at this mhz and voltage. Pretty pleased with it. :D

[ixnay]

Originally posted by Miralcos
I'm running at 2.5ghz right now at 1.85volts. All I can remember from the stepping is it's JIUHB DLT3C and the week is 0333. It's stable as a rock at this mhz and voltage. Pretty pleased with it. :D

Based on tha fact that I have no idea what a "Innovatek WB/ 1/2" lines/ Eheim 1048" is I'm guessing this is on water?

[Cuda]

Looks like a w/c rig to me.:)

[Miralcos]

Originally posted by ixnay


Based on tha fact that I have no idea what a "Innovatek WB/ 1/2" lines/ Eheim 1048" is I'm guessing this is on water?

Yessir, you are guessing correct.. :)

[Cutter]

Originally posted by Miralcos
Well, I guess as my luck would have it, I seem to be the only person in the last week that ordered a retail 1800 that got something other than NIUHB. Mine is JIUHB 0333 and it will not boot with stock voltage at 1800mhz. I'm burning in now and hopefully tomorrow it will do better..... :)


I got the same exact steppings as you dude, I hope I have better luck with mine. Keep me posted on your results please......IE Settings it could prove to be quite helpful for me.

BTW pairin it with an 8RGA+


Edit**** just read your last post MIr 2.5 ghz will be enough for me also:cool:

[Miralcos]

It seems to be quite happy at this mhz. I love the fact it runs at 2.5 with 1.85v. Paired with dualchannel ram at 5-2-2-2 timings and it is very very zippy.... I'm pretty pleased at the moment, soon I'll get bored with this speed and try pushing it to the limit. :)

edit: by settings, what would you like? I had to burn in the chip at stock speed with 1.95v for 24hours before it would be stable at 2.5ghz and 1.85v....

[julianba]

Nice one Miralcos:thup: I'm sitting at 2296mhz til i get my new psu I hope i can hit 2500mhz on this one, then i'll be satisfied, for awhile anyway

[Mizzery]

Originally posted by julianba
Nice one Miralcos:thup: I'm sitting at 2296mhz til i get my new psu I hope i can hit 2500mhz on this one, then i'll be satisfied, for awhile anyway

: DROOL: Me wants better psu too. Guess if the cpu pickings aren't going to get me much over what i got for a while i can upgrade my other components. :/DROOL:

[felinusz]

I bought it today. The store has two more left in stock *exactly* the same as the one I got. I took a picture of the chip with my webcam - HERE (http://www.ngemu.com/forums/attachment.php?attachmentid=49566).
http://www.ngemu.com/forums/attachment.php?attachmentid=49566

The complete stepping is:

AXDA 1800 DLT3C 9543385260259 JIXIB 0332 VPMW

I'm going to crack it out tommorrow afternoon and see how it flies - note that I have really, really bad RAM that won't cut above 205 (I returned my unperforming Hynix BT-D43 :() - and a motherboard with a low chipset voltage that hasn't been modded yet. The highest stable overclock I can *physically* get with my current memory is 12.5 x 205.... waiting for Twinmos in the mail ;)

[julianba]

Couldn't wait im stable at 2403 now and 1.71v...... Does anyone know the significance of the MPMW , XPMW etc. for the various steppings for these chips??

[c627627]

OC Detective & Gautam

http://forum.oc-forums.com/vb/showthread.php?s=&threadid=222237

[brennan77]

Originally posted by julianba
Couldn't wait im stable at 2403 now and 1.71v...... Does anyone know the significance of the MPMW , XPMW etc. for the various steppings for these chips??

That's very nice there. I am envious.

[Ducker]

It seems to be quite happy at this mhz. I love the fact it runs at 2.5 with 1.85v. Paired with dualchannel ram at 5-2-2-2 timings and it is very very zippy.... I'm pretty pleased at the moment, soon I'll get bored with this speed and try pushing it to the limit.

I just got my 1800+ in from Newegg today, it's a AXDA1800DLT3C JIUHB03333VPMW. I hope I can get to 2.5 on air. :D I've had really good luck with my 1700+ Tbred B JIUHB DLT3C 0319, it's running 2.5 on air...stable!

[julianba]

Originally posted by brennan77


That's very nice there. I am envious.

I got lucky with this one, the first 1800+ i bought was a jiuhb 0311mpmw and it topped out just over 2.3 ghz @1.84v with the exact same setup, what a difference!:attn:




Felinusz, how is that jixib working out?

[brennan77]

Originally posted by julianba


I got lucky with this one, the first 1800+ i bought was a jiuhb 0311mpmw and it topped out just over 2.3 ghz @1.84v with the exact same setup, what a difference!:attn:




Felinusz, how is that jixib working out?

Interesting that my 1800 with the same stepping as your first one gets over 2400 with the same setup.

[TT]

hey

i found a 1800+ niuhb 0334 spmw

should i buy it?

have you ever heard it?

[felinusz]

Sure - go for it if you need a new processor - although all these "new" (NIUHB, KIUHB, JIXIB, JIXHB) steppings seem to be popping up everywhere now and I don't think they are actually particularly "rare" - in fact I think that we will be seing these a lot from now on. I suspect that they are really very much the same as the 033X JIUHBs as well - but all the new (033X) week chips have been having *really* good results so far - so why not invest in a cool sounding stepping?

I am going to crack my 1800+ JIXIB tonight - I have been hellishly busy until now and have finally found time. I will have results tonight or tommorrow morning :)

[Hughhefner]

Well Newegg STILL has them , just received my other 5 1800's. All of them are RETAIL, DLT3C NIUHB 0334

Grab em while they are still out.

[Ducker]

Well Newegg STILL has them , just received my other 5 1800's. All of them are RETAIL, DLT3C NIUHB 0334

Arrugh!!!! Just got mine from Newegg yesterday, a JIUHB. And I did order it retail. D**, guess I'm just not lucky. :( Oh well, I'll see what I can get out of this chip. I'll post back after I try it. But that'll probably be in a week or so (waiting on a Newegg NF7-S refurb, they go fast!).

[felinusz]

O.K. - I have cracked the JIXIB chip out.

Before Burn in - popped in and am running at 2500 MHz prime95 stable for half an hour so far with a 1.85 Vcore voltage - load temperatures ~37 Degrees Celcius/Cooling in signature (water).

Looks promising :)

Unfortunately I couldn't do the routine testing @ stock Vcore as my volt mod prevens voltages lower than 1.7 - but it *did* do 2400 MHz on 1.725 for half an hour prime95 stable!

Note that all my clocks are 200 x 1X (as my RAM is DDR 266 and can't scale past 66% sync - limiting my FSB to 210).

I am going to keep going and see what I can get out of this chip. I also noticed before putting it in - when I swapped my old 1700+ JIUHB 0319 out that the core on this chip is *very* red in color compared to my old chip which was a very shiny silver/white color. I don't know if this has any signifigance or not - but it is worth mentioning.

[julianba]

Originally posted by TT
hey

i found a 1800+ niuhb 0334 spmw

should i buy it?

have you ever heard it?

[RedDawg41]

yes, if it's a good deal for you. It doesn't garuantee you an instant hit for OC'ing, but nothing says you can't try to?!

[julianba]

Originally posted by TT
hey

i found a 1800+ niuhb 0334 spmw

should i buy it?

have you ever heard it?

the above post does not exist, it is a figment of your sick, twisted imagination :D


My 1800+ niuhb 0334 is running prime 95 right now at 2520mhz and 1.82-1.84v. Try it and see, there is no guarantee, but this seems to be a very nice stepping. A few others here have had 2500mhz+ overclocks with this one...

[Ge|atinousFury]

I just placed my order for a Newegg retail 1800+....I hope it's a NIUHB or something with an "X" in it. I'll post results as soon as it comes in. These processors are awesome!!

[Michfan]

EVeryone still getting these at newegg? I may purchase one later this week because i think my 2100+ is about to die on me.

[dinster]

Originally posted by Ducker


I just got my 1800+ in from Newegg today, it's a AXDA1800DLT3C JIUHB03333VPMW. I hope I can get to 2.5 on air. :D

hey ducker, pls post ur result for this gem ! i'm also using 1800 DLT3C 0333 VPMW but i have to wait for my water rig b4 push it to the limit !!!

[Ducker]

hey ducker, pls post ur result for this gem ! i'm also using 1800 DLT3C 0333 VPMW but i have to wait for my water rig b4 push it to the limit !!!

I'm still trying to score an NF7-S refurb from Newegg. ;) They haven't had many of them up lately. :( But hopefully any day now I'll be quick enough on the click. Man, when those things do go up, they're gone in a flash! Got every thing else, just waiting on the mobo. Soon as I get it, I'll post my results. I'm very anxious to get this chip up & running, I think it's going to be another good one. What is yours running at now?

[dinster]

doing 2000Mhz @ default voltage, waiting for the water rig to come out, i think this VPMW will give a nice result ;)

[EspElement]

i got somethin non retail from new egg just tonight... and im runnin at 200x10.5 at 1.65 volts with prime at 31C right now.... i havnt dealt with tbreds... is that pretty damn good so far? for the volts and the clocking?