• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Calling AQXEA 0330 owners

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
well from reviews etc, that chip should easily get to 2.4ghz @ 1.85vc with good cooling...some r getting 2.6ghz with watercooling
 
Mine does 11x200 @ 1.60 V with the retail HSF. It's still pretty hot at that voltage (~51C during Prime95), but it is totally stable. I'm afraid to crank it up higher until I get a better HSF.
 
Yup.....

Mine did 2.2ghz (Xp3200+) @ 1.61v , 2.48ghz @ 2.05v - watercooled. Temps were nice and low and she loves voltage. That chip is curently in my second rig, my Aquca only needs 1.87v to hit 2480mhz.

With a pommi & 2v a guy hit 2600mhz, dont be expecting that high. 2.3ghz is a more realistic figure. If your cooling & PSU are good and with high enough Vcore 2.4ghz, very very lucky or water cooling 2.5ghz.......
 
I'm @ 11.5 x 204 right now @ 1.8V (bios). I haven't tried for higher yet, but I know it will do well.
 
right on, thanks guys i'll keep u posted when i install it. thanks
 
I have a AQEA 0330 "9" chip, It dose 11 x 200MHz @ stock volts, Max stable overclock is 2321MHz ( 11 x 211MHz ) @ 1.85 volts

it will boot into windows @ 2471MHz ( 13.5 x 183MHz ) @ 2.10 volts , but is NOT Prime95 stable!

Abit NF7-S v 2.0
2 x 256Mb XMS PC 3500
XP2500+
Spire Falcon Rock II with a 84 CF/M Sunon Fan.
Antec True Power 550 w
 
Last edited:
Back