AMD 1.33

[Livevirus]

Has anyone over clocked the 1.33 to 1.4 Successfully ? If so please reply to this and give me your settings. I tried upping the FSB to 140 and left the voltage the 1.75 and it worked fine for a hour or so then I got a blue screen with Memory Dump .

[Geobronc]

Yep, No problem at all.

Move the multiplier up to 11, keep front bus speed at 133mhz, worked for me!

[Aman99]

Livevirus (Jun 09, 2001 12:02 p.m.):
Has anyone over clocked the 1.33 to 1.4 Successfully ? If so please reply to this and give me your settings. I tried upping the FSB to 140 and left the voltage the 1.75 and it worked fine for a hour or so then I got a blue screen with Memory Dump .

Do you have your RAM settings turned to low, and can your RAM handle 140 mhz FSB?

[Livevirus]

I have 256 mbs PC 2100 DDR memory

[bioevolve]

AMD 1.333 @ 1.509 1.775v 141f full load Cas2 PC-2100 256 DDR try turning the volts up some or get better cooling.

[Diablo]

my axia is running at 1.530 with aircooling and 1.75 volts vcore

[castle lager fan]

The 1.33 AXIA seem to do 1.45-1.5 relatively effortlesly. Good cooling, proper PSU, 11.5x133 and your there. First try 11x133. I have a FIC AD11 and CAS 2.5 memory which I run at CAS2. Everything is rock solid till I try to go above 133 FSB. So I can only turn up multiplier. I am currently running at 133x11.5. I also ran 12x133 which worked just fine, but I kept getting a Prime 95 error which is not acceptable for me.

[TT120]

I got mine up to 1554 with 148 x 10.5. I cant go any higher without it becoming unstable. I run it at the highest FSB I can for better throughput on my ram. I have Corsair pc150 in there.