Dropped some AC wire into the socket for a L12 mod. Went from 220max stable ~ 230 max post FSB to 250 Max post (Highest it can go) 245 loads windows and surfs net. Priming at 236 right now, then some 3d tests. This is on a 1700+ tbred B. Now the mainboard thinks I've got a 2600+. I dont know how or why it works, but it seems it does. Anyhow... if you do it, check the pins repeatedly. I put it in two different wrong locations before getting the right one and consider myself very fortunate that I didn't kill anything. With the board standing on edge so the lever is on right and the cpu socket is at the highest point on the board it can be with mosfets on its left and dimm slots on its right, the lower left corner is the one you want. Also make sure you find the right pins within that corner.
By the way. I'm vdd modded... Running about 1.9vdd. Prime + 3dmark 2001se stable for one run of 3dmark... 240FSB relaxed ram timings (8-4-4-3.0)... gonna swap out my adata for my hyperx and see what fsb I can hit at tightest timings. (5-2-2-2.0)
By the way. I'm vdd modded... Running about 1.9vdd. Prime + 3dmark 2001se stable for one run of 3dmark... 240FSB relaxed ram timings (8-4-4-3.0)... gonna swap out my adata for my hyperx and see what fsb I can hit at tightest timings. (5-2-2-2.0)
Last edited: