- Joined
- Dec 9, 2002
I've been messing with my overclock on my XP1700+ in a biostar M7VKQ tonight. But I ran into trouble when I set it at 155/39/off, now it won't post.
I moved the jumper to clear the cmos
I removed the battery
I removed the battery and then jumpered to clear the cmos
I hit the reset switch
I unplugged the power supply, then pulled the battery, then jumpered the cmos
Nothing I do works. The board won't post. Hard drive and cpu fan come on, the drive starts to spin up then goes silent. Nothing shows on the monitor, the only sign of life is the cpu fan spinning.
What do I do now?
I moved the jumper to clear the cmos
I removed the battery
I removed the battery and then jumpered to clear the cmos
I hit the reset switch
I unplugged the power supply, then pulled the battery, then jumpered the cmos
Nothing I do works. The board won't post. Hard drive and cpu fan come on, the drive starts to spin up then goes silent. Nothing shows on the monitor, the only sign of life is the cpu fan spinning.
What do I do now?