Duron @ 133 or above FSB problem!

[Aya Brea]

My Duron 800 AKCA work great @ 1050 (140x7)... But if I turn off for a long time that the CPU can cool down and turn it on again. It won't POST. Leave it alone for a while (didn't turn off) and reset, it run smoothly! @ 800 (6x133) the same problem still happen!

@ 1050 idle temp = 47C, high load 15' = 54C

HELP ME!

[William]

those temps are kreeping a tad high. You might want to upp the core voltage just a tad.

[UnseenMenace]

Aya Brea (Jun 18, 2001 02:08 a.m.):
My Duron 800 AKCA work great @ 1050 (140x7)... But if I turn off for a long time that the CPU can cool down and turn it on again. It won't POST. Leave it alone for a while (didn't turn off) and reset, it run smoothly! @ 800 (6x133) the same problem still happen!

@ 1050 idle temp = 47C, high load 15' = 54C

HELP ME!

My Duron 800 runs @ 1050 all day ( 140 x 7.5 ) all day :) and never ever idles at a temprature as high as yours even when fully loaded I have never seen 54 c.
I run a core voltage of 1.85 on a FOP-32, what core voltage do you run

[Aya Brea]

Eh! That's 7.5x140 (not 7x140 as I said) @ 1.75 (but MBM report 1.79 or 1.80...) I'll try to raise Vcore. But when the room temp is at 33C ( really hot in Vietnam), I need a water-cooling to give it a shot!