Duron@933 any ideas?

[dura]

I finally managed to get my Duron to run at 133fsb(8x133)on my Kinetiz 7E.Now,when i select a higher multiplier(7x133),it boots,but WinMe freezes.The same happens wit 100fsb and higher multiplier(9x100),it loads,but in the middle,it freezes.The only way to get it running at a higher frequency is 8x110.I checked the cpu's temperature at all times,it didnt exceed 39C.I set higher core voltage,same thing.Do you guys know any combination that works?what am i doing wrong?Ieven got it boot@1000 but same thing,Windows froze just before it showed the desktop-i dont get protection errors-blue screens-,it just freezes. :)

[UnseenMenace]

I run my Duron 800 @ 1050 (7.5 x 140 ) 1.85 v and its perfectly stable on WinME .. I have experienced freezing and lockups which were due to not running enough voltage I believe

[dura]

UnseenMenace (Jun 20, 2001 02:13 p.m.):
I run my Duron 800 @ 1050 (7.5 x 140 ) 1.85 v and its perfectly stable on WinME .. I have experienced freezing and lockups which were due to not running enough voltage I believe


i know,it should run stable..btw,i connected ALL bridges on CPU,as they told me at QDI support.could that have anything to do with it?i use silver solution.has anyone managed to o/c a duron on that motherboard?

[Simon____yeah]

UnseenMenace (Jun 20, 2001 02:13 p.m.):
I run my Duron 800 @ 1050 (7.5 x 140 ) 1.85 v and its perfectly stable on WinME .. I have experienced freezing and lockups which were due to not running enough voltage I believe

Well Man, I m a new guy in overclocking, I m using Duron 800 now, but the maximum I can tune is only 900Mhz, and it is already 53'C and I have no idea to push it much longer!!!!!!!!!!!!!!!!!! but i just use to 1.7V... is it the voltage not enough??

[gamba]

It looks that your CPU is at the limit.
Did you get up the voltage????
Which duron are you using???


***********************************************
Duron 650@1009 (10x100,9) 1,7V Fop32-1
Idle 38º Load 47º.
192Mb Pc133
A7V rev. 1,02 1008x/fxd raid bios

[Simon____yeah]

gamba (Jun 21, 2001 06:23 a.m.):
It looks that your CPU is at the limit.
Did you get up the voltage????
Which duron are you using???


***********************************************
Duron 650@1009 (10x100,9) 1,7V Fop32-1
Idle 38?Load 47?
192Mb Pc133
A7V rev. 1,02 1008x/fxd raid bios

I am now using the AMD Duron, with normal at 8*100=800
but now is 800@850 (8*105) 1.7v......with temp 45'C

[Simon____yeah]

Well I forget to tell here everybody, my mainboard seems setted the highest voltage is 1.875v, but not higher, is there any method to unlock it?? or from CPU??