- Joined
- Aug 1, 2002
- Location
- Pembroke Pines, Florida
my MOBO is the A7N8X DLX. ram Corsair 3200xms 512.
in my bios the setting are.
memory frequency = 100%
memory timming = aggressive
8-3-3-2.5T
DDR reference voltage = 2.6v
fsb = 200
multi = 11.0x
1.850v
psu thermaltake 550w
I realy dont know much if anything at all about ram settings.
I did run memtest for about 11hrs nothing happen. the MOBO gives me that system failed memory test but all it still loads and everything seems to run fine.
My question is, is there a better setting other than this that will take better advantage of my ram?
in my bios the setting are.
memory frequency = 100%
memory timming = aggressive
8-3-3-2.5T
DDR reference voltage = 2.6v
fsb = 200
multi = 11.0x
1.850v
psu thermaltake 550w
I realy dont know much if anything at all about ram settings.
I did run memtest for about 11hrs nothing happen. the MOBO gives me that system failed memory test but all it still loads and everything seems to run fine.
My question is, is there a better setting other than this that will take better advantage of my ram?