I just couldnt help myself...

[Crossett]

All my watercooling stuff finally got here today, and my case needs to be modded a little bit for everything to fit. But i got impatient and just had to see it all hooked up and running.

Figured you guys would get a laugh out of this.

http://www.eek3.net/upload/files/tempsetup.jpg

that's the computer i'm typing on right now.

Ya know, now that i think about it, should that plate go under the water block or over it like i have it? The White Water didnt come with any instructions.

and yes, this is very temporary. It will all be in the case tomorrow ;)

[shiyan]

the pot is a great addition lol. :D

just remember once you put it in your case, you'll still need some air moving to cool all the other stuff on the motherboard.

[Soja]

I believe you have the p4 adapter plate on correctly.

[Crossett]

Originally posted by Soja
I believe you have the p4 adapter plate on correctly.

oh, ok. Thanks :)

[cupidr17]

also, you might wanna put some shrouds on that heatercore. you will see a major difference in temps

[Crossett]

Originally posted by cupidr17
also, you might wanna put some shrouds on that heatercore. you will see a major difference in temps

yeah, i got some just havent put them on yet.

[nikhsub1]

Um, the adapter is on WRONG. It should be on the bottom as you thought. If it is working this way, fine but I would change it.

[Soja]

Originally posted by nikhsub1
Um, the adapter is on WRONG. It should be on the bottom as you thought. If it is working this way, fine but I would change it.

My bad :eek:! Aren't a lot of p4 adapters on top or was I just thinking of socket hold downs :bang head ?

http://www.dtekcustoms.com/images/products/waterblocks/P-4%20Mounted2.jpg

[JML]

You'll want to use shrouds for the heatercore's fans, they will cool better and be quieter

[humdinger]

Dangerous amount of splasing going on in that pot :) Yep the mounting is wrong on your dtek block, but I've got mine set up the same way as yours... temps are still good so I don't care :D