Best overclocking Duron

[Carmine_Paterno]

I just bought a A7A266 motherboard, and don't have enough for a 1ghz thunderbird, so i am gonna get a Duron. What is the best one for overclocking? I was thinking of getting the 750/700, but what do you guys think.

[phiber]

well i think the 700 and 750 are the best bang for the buck

[Hoot]

Without a doubt, the best is the 600 Duron and preferable with the AKBA or AKCA stepping codes. See my sig.

Hoot

[ºSåmuråiº]

Well, obviously not the 700 and 750. The 600 and 650 proves to be very much better !.

[Bender]

I agree with Hoot some of the best overclockers are the duron 600 and 650. My AKBA 600 will do 1102 aircooled at 2.11v or 1050 at 1.85v. I would either go with an AKBA 600-650 or any 800-850 for the most bang for your $.

[el]

wow hoot I saw the 600 you had go high but I didn't know your temps were so low! 37C running primer95 at 1.95volts. Whoa

[JAWS]

I am very impressed with my 700, and it only cost
me $31. I have heard a lot of good things about the
600 and 750 too.

[Cowtown]

I really liked my Duron 700 I just passed on to my brother. Worked at 950MHz no problem, I ran it at 900 for the sake of reliability. I was running the Duron on a A7V, now with my A7V133 I bet I could get it to 1GHz if I pissed around enough with bus speeds and what not.

[Aman99]

Heres my results based on testing of about 15 duron CPU's...

600's do 950-1000 (2 tested)
700's do 950-1000 (about 6 tested)
750's do 950-1000 (about 6 tested)
800's do 1000 (1 tested)
900's do 1100 (1 tested)
950's do 1150 (1 tested)

hope that helps!

Aaron

[gamba]

duron 600-650 are easier to overclocked.

Mine at 1000 (10x100) at 1,7V

globalwin FOP32-1

Waiting for my asluminium drill block

Watercooling is coming

[!-=sky=-!]

i have duron 750 at 990

[UnseenMenace]

I have a Duron 800 @ 1050 but the 600's appear to be better

[Aman99]

the 600's are $34 on pricewatch, the 800's are $33 on pricewatch, I'd say 800 Duron would be the way to go.

Aaron